Laserfiche WebLink
Monitoring System Certification <br /> D. Results of Testing/Servicing <br /> Software version Installed: 328.02 __— <br /> Com tete the followi ebeeklist: <br /> x Yes ❑ No* Is the audible alarm operational? <br /> x Yes ❑ No` Is the visual alarm operational? <br /> x Yes ❑ No' Were all sensors visually inspected,fulmctbnally tested,and confirmed operational? <br /> x Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> x Yes ❑ No' If alarms are relayed to a remote monitoring station, is all communications equipment (e.g., modem) <br /> 3 NfA operational? <br /> T Yes ❑ No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment <br /> N/A monitoring system detects a leak, fails to operate,or is electrically disconnected? If yes: which sensors initiate <br /> positive shut-down? (Check all that apply) x Sumpfrrench Sensors; E]Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks Md sensor failureldisconnection? x Yes; ❑No. <br /> x Yes ❑ No' Fnr tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e., no <br /> p N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fill point(s)and operating properly9 if so,at what percent of tank capacity does the alarm trigger? 90 <br /> Yes* x No Was any monitoring equipment replaced? If yes, identify specific sensors, probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement parts in Section E,below. <br /> ❑ Yes- x No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br /> ❑Product: O Water. If yes,describe causes in Section E,below. <br /> x Yes ❑ No' Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> x Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? <br /> ' In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: <br /> Page 2 of 3 <br /> 1!Y-036-214 "w .uddurxMg Rev.0126/06 <br />