Laserfiche WebLink
San Joaquin County DIRECTOR <br /> PQ O N Donna Heran,REHS <br /> 0. 0 Environmental Health Department ASSISTANT DIRECTOR <br /> Z., .G 600 East Main Street Laurie Cotulla,REHS <br /> ` �-+�--+ .y <br /> FSS Stockton, California 95202-3029 PROGRAM COORDINATORS <br /> Mike Huggins, REHS,RDI <br /> Margaret Lagorio, REHS <br /> rp i F p,R NSP Website: www.sjgov.org/ehd Robert McClellon,REHS <br /> Phone: (209)468-3420 Jeff Carruesco, REHS, RDI <br /> Fax: (209)464-0138 Kasey Foley,REHS <br /> May 18, 2009 <br /> Barghausen Consulting Engineers, Inc. <br /> 1821572 NO Avenue Sent Fed-Ex <br /> Kent WA 98032 SR0057041 <br /> Attn: M. Alexia Inigues <br /> RE: Costco#658 3250 W Grantline RD,, Tracy CA Cop,�� <br /> f <br /> The San Joaquin County Environmental Health Department (EHD) has completed the <br /> review of the application for permit to install a PLLD an each 87 turbine and the 91 <br /> turbine. The permit has been approved with the following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> Call Michelle Henry to arrange the following inspections (a 48 hour <br /> notice is required): Verification that each PLLD will detect a leak of 3 <br /> gallons per hour at 10 PSI <br /> 2. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board (may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s)of the <br /> component(s)being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 3. Permit expires 180 days from date of approval. Note: If an extension to the <br /> expiration date is required, a written request must be submitted to this office prior <br /> to the expiration date. <br /> 4. All components must be certified by an independent testing organization and <br /> labeled as required by the organization. (UL, ULC, ANSI, API, ASTM, etc. See <br /> California Code of Regulations (CCR), Title 23 Chapter 16 Table B for complete <br /> Page 1 of 2 <br />