Laserfiche WebLink
Installer menu: PIN XXk. default) <br /> =age <br /> =age 6/12 <br /> Set Min Stock Inactive 4 This feature is not used on the Costco Additive select Product: <br /> Dispensing System. Tanks 1 <br /> Tank2 2 <br /> Default value is 000000.00 GAL Tank3 3 <br /> Changing the default value will result in unwanted i <br /> stock level warnings. <br /> Input Minimum <br /> Stocklevel: <br /> Tank 1 1 <br /> 000200.00 GAL <br /> Set Mode Operation mode should be set to"Pre-Select'for Select Product: <br /> all tanks. This parameter should not be changed. Tankl 1 <br /> The parameter must be set for EACH tank. Tank2 2 <br /> Tank3 3 <br /> Inactive 4 <br /> ----------------- <br /> Operation Mode 1 <br /> ----------------- <br /> Pre-select 1 <br /> Free Dispense 2 <br /> Initial Timeout Defines the delay between the pump start and the Select Product: <br /> valve actuation to begin the dispense. Default is Tankl 1 <br /> 20 seconds to allow the leak detector(not part of Tank2 2 <br /> this system)to obtain a stable reading.The time Tank3 3 <br /> must be set for EACH tank. Inactive 4 <br /> Select a product and confirm with"OK" <br /> or return with"Quit'. <br /> ----------------- <br /> Timeout: 020 <br /> Enter the new timeout and confirm with"OK <br /> or return with"Quit". in Seconds <br /> from 0-255 <br /> Inactive Timeout If the pulse input from the meter stops before the Select Product: <br /> preselected quantity has been reached,the Tankl 1 <br /> system will wait for the defined time before the Tank2 2 <br /> batch stops and the valve closes(default 6 sec). Tank3 3 <br /> This will not occur during normal operation. The Inactive 4 <br /> timeout must be set for EACH tank. <br /> • <br /> Select a Tank and confirm with"OK" <br /> or return with"Quif. ----- <br /> Timeout: 006 <br /> ----------------- <br /> Enter the new timout and confirm with"OK" in seconds <br /> or return with"Quit". from 0-255♦ <br /> LMS_Baby System <br />