INSTALL_2013 - Laserfiche WebLink

Home Browse Search

9. The Manteca site plan sheet T-3 illustrates an existing 48" double wall polysided fiberglass containment sump. Item hexagon 33 lists a conduit entry fitting for round sumps. Correct the discrepancies. Submit corrected version. Response: The actual paint-of-entry for the product line will occur at the round part of the existing sump. Only the bottom 24-inches of the existing sumps are flat sided (polysided). The upper portion of the sump is round. See Elevation View D for point-of-entry of the product line. 10. The site plan sheet T-5 hexagon item 24 describes a magnetostrictive probe 0.1 GPH w10 water detection model number VR 846391-601 but the manufacturer's cut sheet provided states 0.1 GPH leak detection model number as VR 846391-401 and probe for inventory only as VR 846391-601. Correct the discrepancies. Submit corrected version. Response: The description for Item 24 on Sheet T-5 has been revised to identify the probe as inventory only. 11. Provide the following current install/manufacturer training certification: ICC install/retrofit, ICC service tech, Containment Solution tank and sump, FE Petro leak detector, Veeder-root Certification Technician, Bravo DoubleWall, Bravo Retrofit, Bravo F-Series, OPW spill container, Flexing-flex connectors, and Ameron Dualoy. Response: Current install/manufacturer certifications have been included in this resubmittal. The installer completed the training class on December 20, 2012, but he has not received his certification document from Blue Line. We will forward the certification as soon as it is provided. COMMENTS PROVIDED BY: GARRETT BACKUS,SENIOR REHS/TELEPHONE: (209)468-2986 1616 EAST HAMMER LANE,STOCKTON,CALIFORNIA 95210 CosTco Loc. No.381 OUR Joe No. 10199 1. The overfill prevention method for the Lubrizol tank must be in compliance with Title 23 California Code of Regulations section 2635(b)(2). Only one of the methods listed in this section is required. The method listed in the monitoring plan issued to satisfy the regulation. Other methods can be also be used in addition. One method is "external audioNisual alarm set at 90% of tank capacity" which was initially written in the Lubrizol tank monitoring plan. This statement can be returned to the comments section of the Lubrizol monitoring plan and the external audio/visual alarm will be tested during the install. Also add this method to page 7 of the install permit application. A second method is "Provide positive shut-off of flow to the tank when the tank is filled to no more than 95 percent of capacity"which cannot be used with an OPW 61 fSTOP since a tight shutoff is not achieved in the closed position,"according to the OPW cut sheet. A third method is "Restrict delivery of flow to the tank at least 30 minutes before the tank overfills, provided the restriction occurs when the tank is filled to no more than 95 percent of capacity,and activate an audible alarm at least five minutes before the tank overfills." If the third method will be listed in the monitoring plan to satisfy the 2635(b)(2) regulation then provide the following to use the third method: tank chart for the Lubrizol tank to determine the property OPW 61fSTOP length for 95% shutoff, OPS 61fSTOP instructions to set the valve at 95% tank capacity, and assurance that the Lubrizol delivery into the tank will be maintained at 25 gallons per minute as per the OPW 61 fSTOP specification. Also include the following statement in the monitoring plan comments: "Overflow prevention is achieved by 10199.003.doc