Laserfiche WebLink
16. 6A Tanks subject to ftoata_ion. [Section 2635 (a) (7)] <br /> A. Anchored by deadman or slab. <br /> B. Anchors to be installed as specified by manufacturer. <br /> C. Installation details provided on plans. <br /> D. Calculations provided. <br /> 17. SPILL AND OVERFILL PREVENTION <br /> Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br /> container(s)/piping sump(s) required, including tank fill and all openings). <br /> 1� A. Spill container [Section 2635 (b) (1)]. <br /> 'A If made of metal, exterior wall protected from galvanic corrosion. <br /> X Capacity: (minimum of five gallons) s <br /> X Equipped with a drain valve which allows r7 <br /> llows /d�nIrainage of spill into primary container. <br /> Manufacturer: 15r"W WI1Pcd:er► 100(1-'C9l0 <br /> X B. Overfill prevention system does not allow for manual override and meets one of the following requirements: <br /> (1) Alert transfer operator at 90% full by restricting the flow into the tank or <br /> ! <br /> II )7 <br /> Manufacturer: r—MtJ IJIV V t Model: /4000 <br /> _ (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than <br /> 95% capacity and activates an audible alarm at least five minutes before overfill [Section 2635 <br /> (b) (2) (B)]. <br /> Manufacturer: Model: <br /> x (3) Provide positive shut off at no more than 95% capacity [Section 2635 (b) (2) (C)]. <br /> Manufacturer: rmCo WhPjv, Model: 41100 <br /> (4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br /> exposed to the product overfilling [Section 2635 (b) (2) (D)]. <br /> Manufacturer: Model: <br /> 18. PIPING INFORMATION <br /> PIPING INFORMATION TANK# l TANK# 2 TANK# TANK# <br /> DISTANCE from /�v <br /> DISPENSER to TANK IU <br /> MANUFACTURER M <br /> SYSTEM TYPE Pr L' 5S J <br /> CONSTRUCTION ** Ol9//��i,b� f��l �P <br /> MATERIAL *** A`p <br /> LEAK DETECTION SYSTEM lav, 5 n fi a ( S�Yh I 4-S <br /> 100% METHANOL COMPATIBILITY YES NO <br /> CORROSION PROTECTION YES NO <br /> * System Type; suction, pressure, and gravity <br /> ** Construction: single-walled, double-walled, lined-trench, etc. <br /> *** Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br /> 7 <br />