COMPLIANCE INFO 2002 - 2005 - Laserfiche WebLink

Home Browse Search

SWIZCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Systems Equipment Resolution: .005/30 min INK9,011"6 Sump# 1 Sump#2 Sump#3 Sump# Sump Diameter: 40" 40" 35" 35" Sump Depth: 30" 30" 27" 27" Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of 15" 10" 16" 12" Highest Piping Penetration: Height from Tank Top to Lowest 10" 7" 22" 27" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Dry Portion of Sump Tested' 2"above Highest Piping Penetration Does turbine shut down when sump sensor detects liquid(both x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA product and water)?; Turbine shutdown response time Is system programmed for fail-safe x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA shutdown? Was fail-safe verified to be El Yesx No ❑NA ❑Yes x No ❑NA ❑Yes x No El NA ❑Yes x No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting 5 Min 5 Min 5 Min 5 Min test: Test Start Time: 9:50 9:35 11:30 1:15 Initial Reading(111): .00 .00 .00 .00 Test End Time: 10:20 10:05 12:00 1:45 Final Reading(RF): .00 .00 .00 .00 Test Duration: 30 Min 30 Min 30 Min 30 Min Change in Reading(RF-R,): .00 .00 .00 .00 Pass/Fail Threshold or Criteria: .005/30 Min .005/30 Min .005/30 Min .005/30 Min Test Result: x Pass ❑Fail x Pass ❑Fail x Pass ❑Fail x Pass ❑Fail Was sensor removed for testing? x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No [INA x Yes ❑No ❑NA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*) is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)