Laserfiche WebLink
- 5- <br /> Dispenser Vapor Piping <br /> 1. Any dispenser with a dispenser piping test valve in the closed position shall be <br /> considered a defect. <br /> 2. The ball valve shall be installed between the test port and the vacuum pump. <br /> The ball valve and test port shall be located on the inlet side of the vacuum <br /> pump. <br /> Phase I System <br /> 1. The Phase I system shall be an ARB-certified system that demonstrates <br /> compliance with the static pressure decay test criteria contained in the latest <br /> version of TP-201.3. <br /> Maintenance Records <br /> 1. Each GDF operator/owner shall keep records of maintenance performed at the <br /> facility. Such records shall be maintained on site in accordance with district <br /> requirements or policies. The records shall include the maintenance or test <br /> date, repair date to correct test failure, maintenance or test performed, affiliation, <br /> telephone number, name and Certified Technician Identification Number of <br /> individual conducting maintenance or test. Additional information may be <br /> required in accordance with local district requirements. An example of a GDF <br /> Maintenance Record is shown in Figure 2B-7. <br /> 2. Maintenance shall be conducted in accordance with Healy Systems Scheduled <br /> Maintenance section of the ARB Approved Installation, Operation, and <br /> Maintenance Manual. <br /> 3. Reconnection of breakaways shall be included in the maintenance records. <br /> Healy Systems, Inc. Phase 11 EVR System, Exhibit 2-VR-201-H <br />