COMPLIANCE INFO 2006 - 2010 - Laserfiche WebLink

Home Browse Search

environ Flexible • • Positive Seal Quality Materials Sump Entry Corrosion Resistance Flexible entry boots have been The exterior studded metal tested to withstand a minimum of u compression ring that 6'of liquid head pressure. These provides the positive sealing seals provide a studded flange pressure is encapsulated connection to create a positive within rubber to protect it from Irg and secure seal where the rubber corrosion. More than a 1/8" contacts the sump wall and also of rubber isolates the metallic around the pipe or conduit. studded ring from the ground - Tightening down on a series of environment. All studs are stud fasteners with a compression ring provides a high made of 401 stainless steel and are only exposed compression mechanical seal compared to screw on on the inside of the containment sump. type bulkhead seals. Chemical Compatibility Angled Entries All seals are made of Pipe and conduit entering the specially formulated containment sumps may not be Buna-N rubber perpendicular with the sump wall. compound which has Angled entries are generally a been independently result of directional plumbing tested to insure its restrictions on the inside of the compatibility with a wide containment chamber due to assortment of chemicals. space limitations. Flexible entry These tests include measuring boots are flexible enough to the material's retention of properties as well as the permit angled pipe or conduit entries(on two axises) physical characteristics of the seal after exposure. into the sidewall of a containment chamber.All flexible entry boots permit angled entries up to a 15 degree angle off the perpendicular center line in any direction without leaking or putting undue stress on the pipe or =r conduit seal. ' i Universal Alignment These seals are also capable of universal pipe alignment either up and down or side to side.This feature allows accommodation of pipe entry holes which are + installed slightly off exact center alignment in the chamber wall. This movement will prevent the •- chamber wall from putting undue stress on the pipe coupling/fitting joint and the entry boot as well. For flexible piping applications within dispenser sumps,the stresses on the pipe fittings below Easy to Install the product inlets are minimized by the boot's flexibility. Environ Products,Inc. Customer Service U.S.Patents Publication: EPF-0090 3250 US 70 Business West Tel:(800)833-1883 5263794,5271518,5297896, Issue Date: 05-02-02 Smithfield,NC 27577 Fax:(919)359-3687 5366318,5346625,5398976,@ Copyright 2002 Supersedes: 11-06-01 ��R Envilron Literature Can Be -• From Our a s a