INSTALL 2019 - Laserfiche WebLink

Home Browse Search

SUBMERSIBLE PUMPING SYSTEMS ®Franklin Fueling Systems I SUBMERSIBLE TURBINE PUMPS • 1/3&3/4 Hp fixed speed models are available in Power Requirements variable length and fixed length options. e 1/3&3/4 Hp fixed speed models require single- Check valve:23/4"diameter fluorocarbon seal phase,208-230 VAC, 60 Hz incoming power. constructed with cast aluminum body and steel e 1/3&3/4 Hp fixed speed models incorporate a backing washer. starting and running capacitor,with internal bleed • Pressure relief valve:available in four pressure relief resistor,rated 370 Volt, 15 microfarad. settings,integral to check valve.Standard model e STP-SCI single-phase smart controllers and STP-CBS relieves at 40 psi and resets above 35 psi. single-phase control boxes are available for 1/3 and •Syphon:venturi-type syphon primer supplied with 3/4 hp pump control. every submersible.Syphon check valve and e 1/3 Hp max.motor draw:4 Amps. secondary syphon sold separately. •Air eliminator:every submersible includes a tank return •3/4 Hp max.motor draw: 7 Amps. path with one-way check valve to provide active air Liquid Compatibility elimination. • Electrical disconnect:electrical yoke for positive • Max.liquid viscosity:70 SSU at 60 OF (15 OC). contractor disconnect during service. •Standard STP models are UL and cUL listed for fuel; Pump Motor mixtures containing up to 10%ethanol with gasoline, and 20%MTBE,20%ETBE or 17%TAME with gasoline: e 1/3 &3/4 Hp fixed speed,3450 rpm,two-stage •STPAG (AG compatible) models are UL and cUL listed centrifugal type pump motor with integral,automatic for fuel mixtures containing diesel fuel with up to 20% thermal overload protection. biodiesel, 100%biodiesel, up to 85%ethanol with • 1/3 hp models have a max.pressure of 28 psi. gasoline, and 20%MTBE,20%ETBE or 17%TAME with e 3/4 hp models have a max. pressure of 31 psi. gasoline. e 1/3&3/4 Hp fixed speed models can also be used Approvals with diesel fuels,fuel oils, kerosene,Avgas and jet fuels • cULus listed. in a non-gelled pourable state. • Consult factory for applicable approvals. •All wetted elastomers are made of a high grade, fluorocarbon compound. Quality Certification • Franklin Fueling Systems is an ISO 9001 Certified p1`J Manufacturer. ,PN Performance 1/3 Hp Fixed Speed Turbine Performance Chart 3/4 Hp Fixed Speed Turbine Performance Chart 90 ------------------ ------------------------------------- ------------------- _ 90 80 -- ------------ --------------- Two STP33 ManHolded 80 1/3 Hp Pumps � 70 --------------- ______`_-' _ _ __________ __ _______ __________ _______-- ____ ---- Two STP75 Pumps _ S/4 Hp Pumps 60 - -- - - LL60� ---------- — -------- -- ------ -----------------I---- --------- - ------------ C ` � 50 _______________ ___ ______ ____________ ______________t___ 0 50 - Om STP 3/4 Hp Pump ----- ----------- ------------------- - ------------ u p40 _______________A___ _________ -------- ------------------- _,____ _____________ o One STP33 1/3 Hp Pump , 0 30 -- ---- ----- ------------------- -------'------------ 30 ---------- -------------------- ----------- ---------- ------1 - ------------ 20 - --- ------------------ ----------`------- 20 ---------- ----------------------\-------- ---------- ------------ ----------- 10 ------------------ ----------------- - —---------------- ----------------�— s 0 01 1 0 20 40 60 80 0 20 40 60 80 100 120 140 Flow in Gallons per Minute(gpm) Flow in Gallons per Minute Igpm) Note:Performance based on pumping solvent(0.78 specific gravity).Pressure is taken at the manifold Note:Performance based on pumping solvent 10.78 specific gravity).Pressure is taken at the manifold discharge outlet.STP33 models are powered by a single-phase.60 Hz 208/230 Volt power supply. discharge outlet.STP75 models are powered by a single-phase.60 Hz 208/230 Volt power supply.