Laserfiche WebLink
r <br /> f <br /> t. <br /> A = The distance from the seat surface of the upper drop tube to the bottom of the underground <br /> storage tank . The seat surface will vary depending on the type of installation . See below. <br /> Underneath Fill Adapter Underneath Bucket Inside Bucket <br /> ( EBW Legacy Series ) ( Phil-Tile Series ) ( Defender Series ) <br /> r. <br /> ICYu <br /> * I <br /> t <br /> B = FINAL SHUTOFF VOI. I_tMF HFIGHT According to industry recommended practices , FFS <br /> recommends that you set the final shutoff volume to a maximum of 95 % of the actual tank <br /> capacity. To find the final shutoff volume height, multiply the actual tank capacity ( gallons ) by <br /> the final shutoff volume percentage . ( If you are using 95 % tank volume, multiply the actual tank <br /> capacity by . 95 . ) You then locate the closest volume on the tank chart ( provided by the tank tj <br /> manufacturer ) , and record the corresponding height for " B . " <br /> el <br /> * * NOTE : To accommodate tank tilt or increased /decreased usage of tank capacity, the final <br /> shutoff volume can be adjusted to a value other than 95 % , providing it meets all applicable <br /> regulatory requirements , and is acceptable to the Authority Having Jurisdiction ( AH .I ) . If the final ) <br /> r <br /> shutoff volume is not installed at 95 %, the installing contractor should document the new volume t= <br /> as intended and include it with the station records as reference for compliance inspections . The <br /> installing contractor can do this on the " OPV Installation Record Sheet " or any other applicable <br /> station records . <br /> N <br /> If the final shutoff volume is installed greater than 95 % . make sure in all cases that there is at r <br /> least 250 gallons of ullage volume remaining so that " . none of the fittings located on the top of <br /> the tank are exposed to product due to overfilling " according to CPA 40 CFR Part 230 , <br /> JAN 2 � 2019 � <br /> r <br />