Laserfiche WebLink
- <br /> uuu nae sr anr,rs w s <br /> DATA QUALIFIERS <br /> B Indicates the compound was found in the blank and the sample. <br /> E Concentrations exceed calibration range of the instrument <br /> I - Indicates Interference <br /> 1 - Indicates an estimated value for either a TIC or an analyte that meets the identification criteria but <br /> the result is less than the specified reporting limit. <br /> T - Indicates the compound was found in the TCLP extraction blank and the sample <br /> Iu - Indicates an inorganic compound was analyzed for but not detected. <br /> U - Indicates an organic compound was analyzed for but not detected <br /> BS - Indicates matrix analyses were conducted on reagent grade water <br />' BSD- Blank Spice Duplicate <br /> BDL- Below Detection Limit <br /> D - Indicates that surrogate/matnx spike recoveries were not obtained because the extract had to be diluted <br /> for analysis. <br /> DL - Indicates a secondary dilution <br /> DF - Dilution factor <br />' LCS- Laboratory Control Sample <br /> MB - Method Blank <br /> tMS - Matrix Spike <br /> MSD- Matrix Spike Duplicate <br /> NA - Not Applicable <br /> X - Result is by calculation <br /> NS - Not Spiked *Result was outside advisory limits <br /> NC - Not Calculated <br /> NR - Not Required <br /> NOTES <br /> Solid, sediment and sludge results are reported on a dry weight basis except when analyzed for Landfill disposal <br /> parameters (such as incineration or Illinois Green Sheet parameters) All other mg/kg results are reported on <br /> -i 'as received" basis Reporting limits are detection limits adjusted for samplesize used, dilutions made, and <br /> it the rase of dry weight results, the moisture content of the sample <br />