Laserfiche WebLink
r <br /> EXHIBIT A <br /> DESCRIPTION OF FIELD METHODS <br /> Measurements of the static water level were taken in each well prior to commencing purging, and <br /> a check for floating product was also made at that tune <br /> Prior to sampling, the monitoring wells were purged using a diaphragm pump (supplied by <br /> Armour Petroleum Services) The wells were purged of a minimum of three well volumes, if <br /> possible, or until they went dry A well volume is defined as the amount of groundwater in the <br /> well casing and in the filter pack, at an assumed porosity of 35 percent Measurements of pH, <br /> speck conductance, and temperature of the groundwater were taken at regular intervals during <br /> pumping After purging, each well was sampled with a disposable bailer equipped with a <br /> bottom-emptying valve. The sample was drained directly through the bottom valve into two 40- <br /> milliliter glass vials with Teflon-lined septa. <br /> All groundwater produced during the sampling activity was removed from the site by Armour <br /> Petroleum Services <br /> 5690-R RTSWCr91QTR.RPr <br />