Laserfiche WebLink
Iftepw "o, RegenOx—Part A <br /> Section 6—Protective Measures, Storage and Handling <br /> Technical Protective Measures <br /> Storage: Oxidizer. Store in a cool, well ventilated area away from <br /> all sources of ignition and out of the direct sunlight. Store <br /> in a dry location away from heat and in temperatures less <br /> than 40 °C. <br /> Keep away from incompatible materials and keep lids <br /> tightly closed. Do not store in improperly labeled <br /> containers. <br /> Protect from moisture. Do not store near combustible <br /> materials. Keep containers well sealed. <br /> Store separately from reducing materials. Avoid <br /> contamination which may lead to decomposition. <br /> Handling: Avoid contact with eyes, skin and clothing. Use with <br /> adequate ventilation. <br /> Do not swallow. Avoid breathing vapors, mists or dust. <br /> Do not eat, drink or smoke in the work area. <br /> Label containers and keep them tightly closed when not in <br /> use. <br /> Wash hands thoroughly after handling. <br /> Personal Protective Equipment(PPE) <br /> Engineering Controls: General room ventilation is required if used indoors. Local <br /> exhaust ventilation, process enclosures or other <br /> engineering controls may be needed to maintain airborne <br /> levels below recommended exposure limits. Avoid <br /> creating dust or mists. Maintain adequate ventilation at all <br /> times. Do not use in confined areas. Keep levels below <br /> recommended exposure limits. To determine actual <br /> exposure limits, monitoring should be performed on a <br /> routine basis. <br /> Respiratory Protection: For many conditions, no respiratory protection is <br /> necessary; however, in dusty or unknown conditions or <br /> when exposures exceed limit values a NIOSH approved <br /> respirator should be used. <br /> Hand Protection: Wear chemical resistant gloves (neoprene, rubber, or <br /> PVC). <br /> J:\Operations\MSDS\Regenox Page 3 <br />