Laserfiche WebLink
GETTLER-RYAN INC. <br /> FIELD METHODS AND PROCEDURES <br /> Site Safety Plan <br /> Field work performed by Gettler-Ryan Inc.(GR)is conducted in accordance with GR's Health and Safety Plan <br /> and the Site Safety Plan. GR personnel and subcontractors who perform work at the site are briefed on the <br /> contents of these plans prior to initiating site work. The GR geologist or engineer at the site when the work is <br /> performed acts as the Site Safety Officer. GR utilizes a photoionization detector (PID) to monitor ambient <br /> conditions as part of the Health and Safety Plan. <br /> Collection of Soil Samples <br /> Soil borings are drilled by a California-licensed well driller. A GR geologist is present to observe the drilling, <br /> collect soil samples for description,physical testing,and chemical analysis,and prepare a log of the exploratory <br /> soil boring. Soil samples are collected from the soil boring with a split-barrel sampling device fitted with <br /> 2-inch-diameter,clean brass tube or stainless steel liners. The sampling device is driven approximately 18 inches <br /> with a 140-pound hammer falling 30 inches. The number of blows required to advance the sampler each <br /> successive 6 inches is recorded on the boring log. The encountered soils are described using the Unified Soil <br /> Classification System(ASTM 2488-84)and the Munsell Soil Color Chart. <br /> After removal from the sampling device,soil samples for chemical analysis are covered on both ends with teflon <br /> sheeting or aluminum foil, capped, labeled, and place in a cooler with blue ice for preservation. A chain-of- <br /> custody form is initiated in the field and accompanies the selected soil samples to the analytical Iaboratory. <br /> Samples are selected for chemical analysis based in part on: <br /> a. depth relative to underground storage tanks and existing ground surface <br /> b. depth relative to known or suspected groundwater <br /> C. depth relative to areas of known hydrocarbon impact at the site <br /> d. presence or absence of contaminant migration pathways <br /> e. presence or absence of discoloration or staining <br /> f. presence or absence of obvious gasoline hydrocarbon odors, <br /> g. presence or absence of organic vapors detected by headspace analysis <br /> I <br /> Field Screening of Soil Samples <br /> A PID is used to perform head-space analysis in the field for the presence of organic vapors from the soil sample. <br /> This test procedure involves removing some soil from one sof the sample tubes not retained for chemical analysis <br /> and immediately covering the end of the tube with a plastic cap. The PID probe is inserted into the headspace <br /> inside the tube through a hole in the plastic cap. Head-space screening results are recorded on the boring log. <br /> Head-space screening procedures are performed and results recorded as reconnaissance data. GR does not <br /> consider field screening techniques to be verification of the presence or absence of hydrocarbons. <br /> f <br />