COMPLIANCE INFO PRE 2019 - Laserfiche WebLink

Home Browse Search

Inhalation: If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention. Note to Physicians: Inhalation of high concentrations of this material, as could occur in enclosed spaces or during deliberate abuse, my be associated with cardiac arrhythmias. Sympathomimetic drugs may initiate cardiac arrhythmias in persons exposed to this material. This material is an aspiration hazard. Potential danger from aspiration must be weighed against possible oral toxicity (See Section 3—Swallowing)when deciding whether to induce vomiting. Pre-existing disorders of the following organs (or organ systems) may be aggravated by exposure to this material: skin, lung (for example, asthma-like conditions). Individuals with pre-existing heart disorders may be more susceptible to arrhythmias (irregular heartbeats) if exposed to high concentrations of this material. 5. FIRE FIGHTING MEASURES FIRE Flash Point: 15 F (-10 C) TCC Explosive Limit: (for product) Lower 1.1 Upper 6.7% Autoignition Temperature: 399.0 F (203.8 C) Hazardous Products of Combustion: May form: carbon dioxide and carbon monoxide, various hydrocarbons. Fire and Explosion Hazards: Material is highly volatile and readily gives off vapors, which may travel along the ground or be moved by ventilation and ignited by pilot lights, other flames, sparks, heaters, smoking, electric motors, static discharge, or other ignition sources at locations distant from material handling point. Never use welding or cutting torch on or near drums (even empty) because product(even just residue) can ignite explosively. Extinguishing Media- Regular foam, carbon dioxide, dry chemical. Fire Fighting Instructions. Wear a self-contained breathing apparatus with a full-face piece operated in the positive pressure demand mode with appropriate turnout gear and chemical resistant personal protective equipment. Refer to the personal protective equipment section of this MSDS. NFPA Rating: Health - 1 Flammability -3 Reactivity - 0 PATCH RUBBER COMPANY Page: 4 of 7 Date Prepared: Jan. 7, 2009 FIBERBOND BRUSH TYPE CEMENT MSDS No: 0014 6. ACCIDENTAL RELEASE MEASURES Small Spill.