Laserfiche WebLink
a:. Y <br /> Enseco <br /> A C'mMg Ca'pan,. <br /> II Sample Description <br /> See the attached Sample Description Information. <br /> The samples were received under chain-of-custody. <br /> II Analysis Request <br /> The following analytical tests were requested. <br /> Lab ID Analysis Description <br /> 057016-1, 2 Total Petroleum Hydrocarbons (Gasoline) and BTEX <br /> III Quality Control <br /> t :3 A. Project Specific QC. No project specific QC (i.e., spikes and/or <br /> duplicates) was requested. <br /> is <br /> t� B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations <br /> and procedures cause false-positive analytical results for your <br /> samples. <br /> No target parameters were detected in the method blanks associatAd _ <br /> with your samples at the reporting limit levels noted on the <br /> Method Blank Report. <br /> C. Laboratory Control Samples - The LC5 Program <br /> Duplicate Control Samples. A DCS is a well-characterized matrix <br /> (blank water, sand or celite) which is spiked with certain target <br /> #, parameters and analyzed at approximately 10% of the sample load in <br /> 6g orier to establish method-specific control limits. The DCS <br /> results associated with your samples are on the attached Duplicate <br /> Control Sample Report. <br /> Accuracy is measured by Percent Recovery as in: <br /> °o recovery = (measured concentration x 100 <br /> (actual concentration) <br /> Precision is measured using duplicate tests by Relative Percent Difference <br /> (RPD) as in: <br /> RPD 0, recovery test i /e recovery-test 2) x 100 <br /> (h recovery test i + ". recovery test 2)/2 <br /> A <br />