Laserfiche WebLink
• kn KLEINFELDER <br /> A-3.3 COLLECTION OF SOIL SAMPLES <br /> Soil samples are collected approximately every 5 feet for field screening and logging. Samples <br /> ' are collected by advancing the boring to a point immediately above the desired sampling depth <br /> and then driving (vertical borings) or pushing (slant borings) a Modified California Sampler, <br /> lined with three brass tubes, into the undisturbed soil. The sampler is then removed from the <br /> bottom of the boring. The ends of the bottom (third) tube are covered with Teflon and sealed <br /> with tight fitting plastic caps. <br /> Each sample is individually labeled. The label includes Kleinfelder's name,job number, the date <br /> ' and time the sample was collected, the employee number of the individual who performed the <br /> sampling, and a unique five-digit sample identification number. A custody seal may be placed <br /> on the sample in such a way that any attempt to tamper with the sample is easily visible. <br /> ' A-3.4 SAMPLE HANDLING <br /> After labeling, the sample is immediately stored in an iced cooler for transport to Kleinfelder's <br /> ' office sample control or to the analytical laboratory. A Kleinfelder chain-of-custody form <br /> accompanies the cooler. The chain-of-custody form includes Kleinfelder's name, address and <br /> ' telephone number, the employee number of the individual who performed the sampling, the <br /> sample numbers, the date and time the samples were collected, the number of containers each <br /> ' sample occupies, and the analyses for which the samples are being submitted, if any. The chain- <br /> of-custody form is signed by each person who handles the samples, including all Kleinfelder <br /> employees and the receiving employee of office sample control or the analytical laboratory when <br /> ' the samples are delivered. <br /> A-3.5 DECONTAMINATION OF EQUIPMENT <br /> To reduce the potential for cross-contamination, augers and associated equipment are steam <br /> cleaned prior to drilling each boring. In addition, sampling equipment is cleaned with a <br /> ' trisodium-phosphate wash and rinsed with distilled water prior to collecting each soil sample. <br /> 23-482276-B00/CR96S070 A-4 June 26 1996 <br /> Copyright 1996 Kleinfelder,Inc. <br />