Laserfiche WebLink
VENTILATE YOUR <br /> AREA. WEAR MASK, > ELECTRIC TOOLS <br /> SAFETY GLASSES, > IGNITION SOURCES <br /> GLOVES AND OTHER 0 <br /> PROTECTION <br /> Ensure that the workspace is operating below <br /> MANDATORY the LEL (lower explosive limit). Test regularly <br /> or monitor continuously. <br /> BRAVO RECOMMENDS THAT AT A MINIMUM, <br /> all flexible entry fittings on a sump are retrofit with the <br /> F-Series Retrofit-S fitting. Having every entry fitting <br /> NOTEN sealed with fuel-compatible epoxy will ensure the best <br /> test results. <br /> WARRANTY IS VOID <br /> OR YOUR CERTIFIED STATUS <br /> WILL BE REVOKED .0 <br /> IF ANY OF THE FOLLOWING OCCUR <br /> A) NOT Installing an F-Series Retrofit-S fitting specifically with Bravo EP100-RF epoxy kits. <br /> B) Installing a F-Series Retrofit-S fitting with epoxies that are not specified in this manual. <br /> C) F-Series Retrofit-S Fittings are NOT installed by a Bravo Certified Contractor. <br /> D) Installing a F-Series Retrofit-S fitting on Polyethylene sumps or flexible pipe. <br /> E) Installing a F-Series Retrofit-S fitting without monitoring lower explosive limit. <br /> 3 ii-F-Series-Retrofit-S-15A <br />