Laserfiche WebLink
STEP3CCOIVIPLETET_] <br /> Before starting work, ensure all fuels <br /> Pushing back and flammables have been removed. <br /> 6 existing bolts Test/monitor your LEL's and ventilate. <br /> Push the bolts back into the backfill. <br /> Most bolts move backwards easily. <br /> DO NOT DAMAGE THE SUMP WALL! <br /> Protect pipe Properly protect your piping from power <br /> P - against any or sharp tools. DO NOT DAMAGE PIPE! <br /> damage <br /> STEP 4 CCOMPLETE ❑ <br /> ABRADE <br /> t r 377 <br /> =' I Proceed to grind your walls clean of any <br /> paint, gel-coat, adhesives or sealants <br /> until open fiberglass is clearly visible <br /> 3 INCHES AWAY FROM THE HOLE, <br /> all the way around. <br /> Y <br /> STEP 5 COMPLETE ❑ <br /> _ SECURE ALL CONDUIT LINES BY <br /> STRIPE MARK BRACKETING THEM TO AT LEAST ONE <br /> ^?> �c mark across the RIGIDLY CONNECTED CONDUIT OR <br /> wall and all THE RISER. DO NOT ALLOW CONDUIT <br /> components ENDPOINTS TO MOVE OR ACT AS A LEVER. <br /> FLAT WALLS: Dry fit the body on your pipe and <br /> use a marker to outline the fittings position on the <br /> wall. The curved flange will not be used. <br /> DRY FIT CURVED WALLS: Dry fit the body and the curved <br /> ` flange and use a marker to mark a large stripe <br /> across the sump wall, body and flange. Also <br /> ONLY <br /> outline the fittings position when dry fit. <br /> 8 ii-F-Series-Retrofit-S-1313 <br />