Laserfiche WebLink
STEP 7CCOMPLETE ❑ <br /> 1 <br /> 1 <br /> SPACKLE THE INTERIOR <br /> SOLID WITH ADHESIVE. <br /> FLUSH ON ALL EDGES <br /> APPLY ADHESIVE TO <br /> _ ALL SURFACES THAT <br /> c' CONTACT EACH OTHER <br /> c> � <br /> When only installing the body on flat walls, apply adhesive generously to all <br /> contact surfaces (including any flanges already on the wall), the pipe, interior <br /> of the fitting body, the surfaces of the fitting halves that will meet each other <br /> and the face of the body that will contact the curved flange or bare wall. Be <br /> generous on the interior, this is an area where a large amount of adhesive is <br /> critical. You need to gap-fill any air pockets. <br /> ADHESIVE SHOULD BE PACKED HEAVY ON THE INTERIOR ! <br /> ENSURE THAT YOU HAVE FULL ADHESIVE CONTACT ! <br /> 12 ii-F-Series-Retrofit-S-1313 <br />