Laserfiche WebLink
Veeder-Root Sensor Application Guide <br /> Position-Sensitive Sensor <br /> The Position-Sensitive Sensor is Installed in a pan/sump and incorporates a float switch to detect water and/or <br /> hydrocarbons.The sensor also alarms if it is moved off the bottom of the pan/sump. <br /> Sensor Detection Capabilities -Alarm Conditions <br /> • Fuel alarm is triggered when liquid reaches a nominal height of 1-1/2 inches. <br /> • Sensor Out alarm is triggered when sensor is moved off bottom of the pan/sump. <br /> Operating Capabilities <br /> • Operating temperature range: 0 to+60°C. <br /> • Storage temperature range: -40 to+70°C. <br /> • Sensor dimensions: 12" high, 2.2"diameter. <br /> Sensor/Cable Length Configurations <br /> • Position-Sensitive Sensor w/12 foot cable- Form Number 794380-323 <br /> Sensor Interface Module <br /> • TLS-350 series consoles(except TLS-350J)- Interstitial/Liquid Sensor interface module(P/N 329358-001) <br /> accepts up to 8 sensors(a maximum of 64 sensors could be monitored by the console). <br /> • TLS-350J console-3 sensors max. <br /> • TLS-300/PC-300 series consoles(no interface module required)-8 sensors max. <br /> • ILS-350 console-A Two-Wire Module(P/N 329675-001) accepts up to 4 sensors(a maximum of 16 sensors <br /> could be monitored by the console). <br /> • TLS-450- USM (P/N 332812-001)accepts up to 16 sensors <br /> Console Software Compatibility <br /> • TLS-350 series/TLS-300 consoles(Version 1 or later) <br /> • ILS-350(All) <br /> • TLS-450(All) <br /> Compatible Fuels <br /> • Unleaded gasoline <br /> • Unleaded with up to 5%methanol, <br /> 85%ethanol,or 15%MTBE <br /> • Leaded gasoline <br /> • Diesel Submersible <br /> pump Sensor Cord grip Weatherproof <br /> • Kerosene junction box <br /> • Jet fuel <br /> • Aviation gasoline Containment Seal-off <br /> sump. <br /> Related Sales Literature 1/2"Rigid <br /> conduit <br /> Visit our website at www.veeder.com to console <br /> for more information on Veeder-Root I <br /> Brackets,clamp,etc. <br /> products and services. 1MCI LINE <br /> FLEXIMLE • from optional Universal <br /> sensor mounting kit <br /> ANN Product line <br /> unva+bsswun0.w• <br /> IMPORTANTI Housing must compress <br /> position indicator against bottom of the <br /> sump or you will have a'Sensor Out'alarm. Incorrect Correct <br /> Fig.4 Typical Position-Sensilive Sensor Installation <br /> 7 <br />