Laserfiche WebLink
Veeder-Root Sensor Application Guide <br /> Position-Sensitive Sensor <br /> The sensor is installed in a pan/sump and incorporates a float switch to detect water and/or hydrocarbons.The <br /> sensor also alarms if it is moved off the bottom of the pan/sump. <br /> Sensor Detection Capabilities- Alarm Conditions <br /> • Fuel alarm is triggered when liquid reaches a nominal height of 1-1/2 inches. <br /> • Sensor Out alarm is triggered when sensor is moved off bottom of the pan/sump. <br /> Operating Capabilities <br /> • Operating temperature range:0 to+60°C. <br /> • Storage temperature range: -40 to+70°C. <br /> • Sensor dimensions: 12" high, 2.2"diameter. <br /> Sensor/Cable Length Configurations <br /> • Position-Sensitive Sensor w/12 foot cable- Form Number 794380-323 <br /> Sensor Interface Module <br /> • TLS-350 Series Consoles(except TLS-350J) - Interstitial/Liquid Sensor Interface Module (P/N 329358-001) <br /> accepts up to 8 sensors(a maximum of 64 sensors could be monitored by the console). <br /> • TLS-350J Console-3 sensors max. <br /> • TLS-300/PC-300 Series Consoles(no Interface Module required) -8 sensors max. <br /> • ILS-350 Console -A Two-Wire Module(P/N 329675-001)accepts up to 4 sensors (a maximum of 16 sensors <br /> could be monitored by the console). <br /> Console Software Compatibility <br /> • Version 1 or later(TLS-350 Series/TLS-300 Consoles) <br /> • All ILS-350 Consoles <br /> Compatible Fuels <br /> • Unleaded gasoline <br /> • Unleaded with up to 5%methanol, <br /> 85%ethanol,or 15%MTBE <br /> • Leaded gasoline Submersible <br /> • Diesel pump Sensor Cord grip /�Weatherproof <br /> • Kerosene junction box <br /> • Jet fuel <br /> • Aviation gasoline Containment <br /> mP nment Seal off <br /> Related Sales Literature 1/2"Rigid <br /> conduit <br /> 1 � <br /> Visit our website at www.veeder.com l� <br /> for more information on Veeder-Root •- to console <br /> Brackets,clamp,etc. <br /> t'tj <br /> products and services. a from optional Universal <br /> P sensor mounting kit <br /> Product line <br /> wroDnbWpsumP.•W <br /> IMPORTANTI Housing must compress J <br /> position indicator against bottom of the <br /> sump or you will have a'Sensor Out'alarm. Incorrect Correct <br /> Fig 4 TVI)wal Position Sensitive Sen,nr Installation <br /> 7 <br />