COMPLIANCE INFO 2013 - 2017 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page_6_of—7- S. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other(Spec) Test Method Used: ❑Pressure ❑ Vacuum ® Hydrostatic ❑Other(Spec) Test Equipment Used:VISUAL—TAPE MEASURE Equipment Resolution: +/\0.002" A -+ p £. Fill Sump#87(1) Fill Sump#87(2) Fill Sump#91 Fill Sump# Sump Diameter: 48" 48" 48" Sump Depth: 65" 64" 64" Height from Tank Top to Top of N/A NIA N/A Highest Piping Penetration: Height from Tank Top to Lowest 20" 22" 19" Electrical Penetration: Condition of sump prior to DRY DRY DRY testing: Portion of Sump Tested ABOVE ABOVE ABOVE PENETRATIONS PENETRATIONS PENETRATIONS Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS Wait time between applying pressure/vacuum/water and 10 MIN 10 MIN 10 MIN starting test: Test Start Time: 10:54 12:46 12:26 Initial Reading(Ri): 1.5083" 2.4686" 0.2481" Test End Time: 11:09 1:01 12:41 Final Reading(RF): 1.5083" 2.4705" 0.2480" Test Duration: 15 MIN 15 MIN 15 MIN Change in Reading(RF-Ri): 0.0000" 0.0019" -0.00011, Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" +/-0.002" +/-0.002" Test Result: ® Pass ❑ Fail ®Pass ❑ Fail ® Pass ❑Fail ❑Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ® Yes ❑No ® Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is ❑Yes []No ®NA [:]Yes ❑No ®NA ❑Yes ❑No ®NA ❑Yes ❑No ❑NA detected? Was sensor removed for testing? ®Yes ❑No ❑NA ®Yes []No ❑NA ®Yes [:]No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? ®Yes [--]No ❑NA ®Yes E]No El NA ®Yes El No [:1 NA El Yes El No [:1 NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests)