Laserfiche WebLink
SITE HEALTH & SAFETY PLAN <br /> 8.0 DECONTAMINATION PROCEDURES <br /> A. Introduction <br />` As part of the system to prevent or reduce the physical transfer of <br /> f contaminants by people and/or equipment from on-site, procedures <br /> will be instituted for decontaminating anything leaving the <br /> Exclusion Area and Contamination Reduction Area. These procedures <br /> include the decontamination of personnel, protective equipment, <br /> monitoring equipment, clean-up equipment, etc. Unless otherwise <br /> demonstrated, everything leaving the , Exclusion Area should be <br /> considered contaminated and appropriate methods established for <br /> decontamination shall be followed. In general, decontamination at <br /> the site consists of rinsing of equipment, personnel., etc., with <br /> some amounts of water and washing with detergent water solutions. <br /> B. Procedure <br /> 1. Personnel equipment worn into the Exclusion Area will be <br /> decontaminated upon leaving the Contamination Reduction Area. <br /> All equipment decontaminated will be air dried. <br /> 2. The decontamination of equipment, material,. and personnel used <br /> or working in the Contamination Reduction Area may be somewhat . <br /> less complex than that used in the Exclusion Area. <br /> 3. The spent solution, brushes, sponges, containers, stands,. etc., <br /> used in the decontamination process must,. until shown <br /> otherwise, be considered contaminated and must: be properly <br /> disposed.. <br /> 18 <br />