Laserfiche WebLink
WESTERN FIBERGLASS, INC. 1-800-688-3375 <br />POLYCONTM DISPENSER MOUNTING ASSEMBLY (DMA TM) <br />Summary <br />The PolyCon Dispenser Mounting Assembly shall be installed in conjunction with the product dispenser <br />and in accordance with the manufacturer's installation instructions. The Dispenser Mounting Assembly, <br />shall contain environmentally hazardous fluids that might leak from any piping terminations, fittings, and <br />flex -hoses contained within the Dispenser Mounting Assembly, shall insure, using U.L. Listed frames for <br />both the dispenser base and safety valve assembly, that safety valve poppet activation occurs in the event <br />of dispenser knock -down. <br />System Specifications <br />1.01 System Suitability <br />The Dispenser Mounting/Containment System shall: <br />A. Provide secure, Independent, mounting assemblies for the dispenser base and U.L. Listed <br />shear valve mounting frame that are anchored in concrete for transfer of stress and loading, <br />such that shearing action occurs at the shear valve upon dispenser impact without damage to <br />the mounting framework. <br />B. Provide a mans to prevent surface, ground, run-off or wash -down water from entering the <br />containment system. <br />C. Contain any release of environmental contaminants from the dispenser and/or fittings <br />contained within the Dispenser Mounting System. <br />D. Provide full access to all piping termination's, fittings and hoses contained within the <br />Dispenser Mounting System. <br />E. Accommodate an explosion/flame suppressant barrier to prevent flash fire. <br />1.02 Construction Specifications: <br />A. Be constructed of poly -composite material. <br />B. Be constructed of materials that are not harmfiil to the environment. <br />C. Be suitable for petroleum products and blends including methanol and ethyl alcohol <br />mixtures. <br />D. have a thirty (30) year warranty against corrosion. <br />1.03 Release Monitoring shall: <br />A. Allow full visual inspection of all piping reductions, fittings and hoses. <br />I <br />1.04 Piping Penetrations shall: <br />A. Provide locations for the installations of fluid tight pipe and conduit penetrations seals to be <br />installed according to the manufacturer's instructions. <br />MOMCPJWINWORD/BINDP,RMOLYDMA,gPPGJAN99 <br />