Laserfiche WebLink
A standard FE Petro feature. <br />When necessary during <br />maintenance to bleed line <br />pressure to zero, a vent screw <br />provided. By turning this scrc <br />product is diverted <br />back to the tank, <br />dropping line <br />pressure to zero. <br />If ever required, the pump <br />can be easily removed from <br />the tank by unthreading <br />three bolts. There is no need <br />to disconnect the syphon <br />system, or remove the leak <br />detector from the system to <br />service the STP. <br />PRESSURE REIIEE <br />i; the sump manhole or dispenser <br />;protecting service technicians <br />correcting one problem <br />Another unique feature of FE Petro. Provides for a simple <br />connection to underground piping. <br />,s to connect the pump to the <br />ace in the sump. <br />is <br />M0121"iECIfI At10 <br />POWER SUPPLY OPTIONS: <br />60 Hz Applications: Available in 1/3,3/4, V/z and 1'/2 hp <br />high pressure models in 208230 volt, single phase. <br />50 Hz Applications: Available in 3/4,1'/2 and 1'/2 hp high <br />pressure models in 220240 volt, single phase, and <br />380415 volt 3 phase. <br />50/60 Hz Applications: 2 hp Variable Speed Option for <br />use with Variable Frequency Controller only. Input <br />200250 volt, 50 or 60 Hz, single or 3 phase. Controller <br />provides 3 phase power to 2 hp variable speed pump <br />motor. <br />FlINp NBTNN: <br />Centrifugal type, directly interchangeable with most <br />competitive makes. <br />Maximum liquid viscosity: 70 SSU at 60° F. (15.5° Q. <br />Thermally protected: Automatic thermal overload turns <br />motor off at approximately 205° F (95° C) and resets <br />on at approximately 115° F (45° Q. <br />LIQUID COMPATIBILITY: <br />Standard units compatible with fuel mixtures containing <br />up to 15% ethanol or methanol with gasoline and 20% <br />MTBE, 20% ETBE, or 17% TAME with gasoline, and <br />diesel fuels. <br />Alcohol/Gasoline models (designated with AG in model <br />number) are compatible in fuel mixtures containing <br />any combination of ethanol or methanol and gasoline <br />and 20% MTBE, 20% ETBE, or 17% TAME with <br />gasoline, and diesel fuels. <br />CHECK VALVE: <br />2'/4" (70mm) diameter constructed of aluminum and <br />steel with fluorocarbon seal. Alcohol gas compatible. <br />Palma 111101AL1E <br />• Standard valve is set to relieve static line pressure at 35- <br />50 PSI (2.38 to 3.4 bar), reseals above 30 PSI (2.0 bar). <br />Other settings available. <br />AIR ELIMINATOR: <br />Returns air to tank with one way check valve to prevent <br />back flow. <br />SEAL EUSTONERS: <br />All wetted seals on standard units use Viton°. <br />Alcohol/Gasoline (AG) models use Viton GFLT° <br />fluorocarbon seals. <br />SYPION: <br />Syphon Primer is venturi type, capable of 26" Hg (66cm) <br />vacuum. <br />Syphon Check Valve is machined aluminum, field <br />repairable. <br />VARIABLE FREQUENCY CONTRULIER: <br />Alternating lead pump and master/slave capability. <br />Provides alternating start of the lead pump and <br />'auto start" of additional pumps in manifolded <br />pump applications. <br />Enclosure size is 5'/s" wide by 10" high by 8'/." deep <br />(130mm x 254mm x 210mm). <br />APPROVALS AND/OR LISTINGS: <br />UL, CSA, BASEEFA, TUV, SAA, BHI, INMETRO, TIIS, <br />KHIi FTZU, others pending. <br />QUALITY CERTIFICATION: <br />• FE Petro is an ISO 9001 Certified Manufacturer. <br />