INSTALL 1994 PIPING - Laserfiche WebLink

Home Browse Search

'dank Monitor Sy- ems Less Interruption. Even More Peace Of Mind. Sites with Tank Monitor 3 (eight tank version)and Tank Monitor 2 systems can meet EPA leak detection requirements by performing monthly 0.2 gallons/hour leak tests on their underground storage tanks. Tank Monitor 3.1 (eight tank version)and Tank Monitor 2.1 systems,equipped with the proper probes, can perform tank tests that detect leaks as small as 0.1 gallons/hour in a three hour test. Both also meet EPA requirements for annual 0.1 gallons/hour tank tests performed in conjunction with monthly inventory reconciliations. Restrictions do apply. Check applicable federal,state,and local regulations. Inputs And Outputs. All four systems can accept input from other devices,such as backup generators or third-party line leak detectors. Input signals from these devices are recorded by the Tank Monitor console,and can trigger the programmable Tank Monitor alarm relays. Two output relays can be programmed to react on alarm conditions. Inventory Control. System reports account for: • Fuel Volume • Water Level • Fuel Level • Ullage/Unused Space • Fuel Temperature • Inventory Increase Reports are available at programmable intervals or on demand. Shared Information. By themselves,these systems simplify inventory management,end-shift documentation,and compliance with EPA regulations. When linked with a G-SITE-system or a Transac System 1000"advanced pump controller,the physical inventory data they supply can be automatically merged and compared with console inventory sales records for a complete site management overview. Remote Communications. All four systems can send data to and receive programming information from an on-site or off-site computer. This feature facilitates easier multiple-site management. An auto-transmit mode downloads alarm signals to the on-site management computer for instant notification. Emergency Generator Versions. Several models are available for use with emergency generator tanks requiring full-time leak detection. These modules run a continuous leak test when the generator is not is use. When the generator activates,the system stops the leak test and documents the date and time the generator starts and stops. Stop and start messages,inventory reports,and leak test reports are stored in memory for retrieval . Glilbamo TANK MONITOR 4 through the built-in printer or via the remote communication interface. Tank Monitor 4. The Tank Monitor 4 system is an inexpensive alternative to Tank Monitor 3.1 or Tank Monitor 3. It meets the same secondary containment monitoring requirements, ALARM CAUSE but has no in-tank inventory capabilities. Three different li' 1 05 ® 9 models are available to support up to 12,8,and 4 l� ®FUEL LEAK ®WATER LEAK 02 06 010 interstitial space or sump sensors,respectively. ®3 ® 7 O11 ®SENSOR OUT 04 08 012