COMPLIANCE INFO 2001 - 2006 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 7. UNDER-DISPENSER CONTAINMENT(UDC) TESTING Test Method Developed By: ❑UDC Manufacturer X Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Barrett hydrostatic sump tester Equipment Resolution: <.002gph UDC#7/8 UDC# UDC# UDC# UDC Manufacturer: Bravo Box UDC Material: Steel UDC Depth: 6" Height from UDC Bottom to Top NA of Highest Piping Penetration: Height from UDC Bottom to NA Lowest Electrical Penetration: Condition of UDC prior to Penetration Leak testing: Portion of UDC Tested 2"off bottom Does turbine shut down when UDC sensor detects liquid(both ❑Yes ❑No X NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?* Turbine shutdown response time Is system programmed for fail- ❑yes ❑No X NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA safe shutdown?' Was fail-safe verified to be ❑Yes ❑No X NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA o rational?' Wait time between applying 10 min pressure/vacuum/water and starting test Test Start Time: 3:00 Initial Reading(Rj): 250ml Test End Time: 3:20 Final Reading(RF): 248m1 Test Duration: 17.8min Change in Reading(RF-Rj): 2ml Pass/Fail Threshold or Criteria: <.002gph Test Result: X Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? ❑Yes ❑No X NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and ❑yes ❑No X NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testis ? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) Vapor oenatration was resealed to bottom of bravo box and tested 2" from bottom With passinia results ' If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)