Laserfiche WebLink
Appendix A <br />71 SO Overfill Valve Upper Tube Calculation Worksheet <br />Important: This is meant to be supplemental worksheet and not a substitute to following the installation <br />manual instructions. All length measurements are in inches. Please contact the Authority Having Jurisdic- <br />tion (AHJ) and review local, state, and national codes to determine the regulatory requirements governing <br />shut-off capacity in your region, as well as take into account other considerations such as extreme tank tilt. <br />Desired tank capacity for shut-off: SO%= <br />D �Y) <br />(X) <br />0 (Z) <br />- 2 <br />Dipstick Number on Tank Chart that corresponds to 100% volume (Y) _ <br />Dipstick Number on Tank Chart that corresponds to SO% (X) _ <br />Upper Tube Reference Number Z=Y-X <br />Upper Tube Depth Inside Tank C = Z-2" <br />Distance from top sealing surface for 71 SO Lip' to de the <br />top of Storage Tank' <br />A= <br />For Non -Testable 7150 models only <br />In all cases for non -testable 71 SO models, the top of the valve body must protrude at least 6'/z" into the tank to <br />provide a minimal clearance for proper operation.' Additionally the total Upper Tube Length must be at least 16" <br />of length to include the protective bend in the tube. <br />Is C less than 6 1/2 <br />" Yes / No <br />If NO, Upper Tube Length (D)= C + A <br />If YES, Upper Tube Length (D)= 61/2 "+ A <br />Upper Tube Length = <br />For Testable 71 SO models only <br />In all cases for Testable 71 SO models, the top of the valve body must protrude at least 6'/z"into the tank to provide <br />a minimal clearance for proper operations Additionally the total Upper Tube Length must be at least 14'/z" of <br />length to include the protective bend in the tube. <br />Is C less than 5" Yes / No <br />If NO, Upper Tube Length (D)= C + A - 1 �/z " <br />If YES, Upper Tube Length (D) = 6'/z" + A — 1 �/z " <br />Upper Tube Length = <br />Sealing surface maybe the top of the Face Seal Adaptor, the built in sealing ledge inside some spill containers, or on non - <br />vapor tightapplications the top ofthe pipe nipple <br />1 Some Underground Storage tanks utilize a manwaysystem at the top. Make sure to use the top ofthe storage tank for <br />measurement and not to top of the man way. Consultyour underground tank manufacturer for height of the man way <br />3 This measurement is taken from the seam where the upper tube is attached to the valve body to the inside of the tank top. <br />Fzi7 <br />