Laserfiche WebLink
Important Safety Information <br />Notes: 1) Save this Important Safety Information section <br />in a readily accessible location. <br />2) Although DEF is non-flammable, Diesel is <br />flammable. Therefore, for DEF cabinets that are <br />attached to Diesel dispensers, follow all the <br />notes in this section that pertain to flammable <br />fuels. <br />This section introduces the hazards and safety precautions <br />associated with installing, inspecting, maintaining, or servicing <br />this product. Before performing any task on this product, read <br />this safety information and the applicable sections in this <br />manual, where additional hazards and safety precautions for <br />your task will be found. Fire, explosion, electrical shock, or <br />pressure release could occur and cause death or serious injury, <br />if these safe service procedures are not followed. <br />Preliminary Precautions <br />You are working in a potentially dangerous environment of <br />flammable fuels, vapors, and high voltage or pressures. Only <br />trained or authorized individuals knowledgeable in the related <br />procedures should install, inspect, maintain, or service this <br />equipment. <br />Emergency Total Electrical Shut -Off <br />The first and most important information you must know is how <br />to stop all fuel flow to the pump/dispenser and island. Locate <br />the switch or circuit breakers that shut off all power to all fueling <br />equipment, dispensing devices, and Submerged Turbine <br />Pumps (STPs). <br />The EMERGENCY STOP, ALL STOP, and <br />PUMP STOP buttons at the cashier's station <br />WILL NOT shut off electrical power to the <br />pump/dispenser. This means that even if you <br />1' activate these stops, fuel may continue to flow <br />uncontrolled. <br />You must use the TOTAL ELECTRICAL <br />SHUT-OFF in the case of an emergency and not <br />the console's ALL STOP and PUMP STOP or <br />similar keys. <br />Total Electrical Shut -Off Before Access <br />Any procedure that requires access to electrical components or <br />the electronics of the dispenser requires total electrical shut off <br />of that unit. Understand the function and location of this switch <br />or circuit breaker before inspecting, installing, maintaining, or <br />servicing Gilbarco equipment. <br />Evacuating, Barricading, and Shutting Off <br />Any procedure that requires access to the pump/dispenser or <br />STPs requires the following actions: <br />• An evacuation of all unauthorized persons and vehicles <br />from the work area <br />• Use of safety tape, cones, or barricades at the affected <br />unit(s) <br />• A total electrical shut-off of the affected unit(s) <br />Important Safety Information <br />Read the Manual <br />Read, understand, and follow this manual and any other labels <br />or related materials supplied with this equipment. If you do not <br />understand a procedure, call a Gilbarco Authorized Service <br />Contractor or call the Gilbarco Support Center at <br />1-800-800-7498. It is imperative to your safety and the safety of <br />others to understand the procedures before beginning work. <br />Follow the Regulations <br />Applicable information is available in National Fire Protection <br />Association (N FPA) 30A; Code for Motor Fuel Dispensing <br />Facilities and Repair Garages, NFPA 70; National Electrical <br />Code (NEC), Occupational Safety and Health Administration <br />(OSHA) regulations and federal, state, and local codes. All <br />these regulations must be followed. Failure to install, inspect, <br />maintain, or service this equipment in accordance with these <br />codes, regulations, and standards may lead to legal citations <br />with penalties or affect the safe use and operation of the <br />equipment. <br />Replacement Parts <br />Use only genuine Gilbarco replacement parts and retrofit kits on <br />your pump/dispenser. Using parts other than genuine Gilbarco <br />replacement parts could create a safety hazard and violate <br />local regulations. <br />Safety Symbols and Warning Words <br />This section provides important information about warning <br />symbols and boxes. <br />Alert Symbol <br />This safety alert symbol is used in this manual and on <br />warning labels to alert you to a precaution which must be <br />followed to prevent potential personal safety hazards. Obey <br />safety directives that follow this symbol to avoid possible injury <br />or death. <br />Signal Words <br />These signal words used in this manual and on warning labels <br />tell you the seriousness of particular safety hazards. The <br />precautions below must be followed to prevent death, injury, or <br />damage to the equipment: <br />QDANGER: Alerts you to a hazard or unsafe practice <br />which will result in death or serious injury. <br />WARNING: Alerts you to a hazard or unsafe practice <br />that could result in death or serious injury. <br />QCAUTION with Alert symbol: Designates a hazard or <br />unsafe practice which may result in minor injury. <br />CAUTION without Alert symbol: Designates a hazard or <br />unsafe practice which may result in property or <br />equipment damage. <br />Working With Fuels and Electrical Energy <br />Prevent Explosions and Fires <br />Fuels and their vapors will explode or burn, if ignited. Spilled or <br />leaking fuels cause vapors. Even filling customer tanks will <br />cause potentially dangerous vapors in the vicinity of the <br />dispenser or island. <br />DEF is non-flammable. Therefore, explosion and fire safety <br />warnings do not apply to DEF lines. <br />MDE-4166A The Advantaged Series Unit to Encoret Series island Adapter Kit (M03064KO01) Installation Afanual March 2013 Page 3 <br />