Laserfiche WebLink
Stage II Entry Boot <br />Patent Granted Other Patents Pending <br />Con <br />F <br />A stud mounted entry boot that is installed into the <br />bottom of a shallow dispenser pan to seal stage II <br />pipe entries. The lower studded cuff permits sealed <br />attachment of the flexible isolation Tube and the upper <br />bellows permits a sealed attachment to the outside of <br />a steel reducer bushing (included) to transition from <br />1-1/2rr to 1 ". <br />t <br />A studded entry boot is used to seal 3/4" conduit entries <br />into the bottom of a shallow dispenser pan. Their small <br />size allows them to be used in congested areas in the <br />bottom of a dispenser pan and to allow close perimeter <br />conduit entries. <br />NOTE: Conduit entry boots are permitted in the bottom of dispenser <br />pans only. For conduit penetrations in sumps, use the appropriate <br />sized flexible entry boot through the side wall of the sump only. <br />PART NO. SIZE <br />Patent Granted <br />Other Patents Pending CEB-3075 3/4" <br />A rubber isolation tube designed to provide dielectric <br />isolation of a metal flex connector entering the base of <br />a Dispenser Pan. The flexible tube attaches at its lower <br />end to the outside of a 3" nominal pan and at its upper <br />end to the studded cuff section of a pipe entry boot or <br />stage II entry boot. The flexible isolation tube is not <br />intended for secondary containment <br />PART NO. SIZE <br />FIT -3530 <br />3-1/2" X 30" <br />FIT -3542 <br />3-1/2" X 42" <br />FIT -4530 <br />4-1/2" x 30" <br />o <br />27 environ, <br />