COMPLIANCE INFO 2006 - 2011 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 9 of 6. PII'ING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 Sump# 1 Sump#2 Sump#3 Sump# Sump Diameter: 48" 48" 48" Sump Depth: 611/2" 62" 61" Sump Material: Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of product 22" Product 21" Product 19" Highest Piping Penetration: Height from Tank Top to Lowest 36" 36" 39" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested' Water Line 40" Water Line 42" Water Line 41" Does turbine shut down when sump sensor detects liquid(both X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?` Turbine shutdown response time Not Alarmed Not Alarmed Not Alarmed Is system programmed for fail-safe X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown?* Was fail-safe verified to be Yes X No ❑NA Yes X No ❑NA Yes X No ❑NA ❑Yes ❑No ❑NA operational?* Wait time between applying water 5 Minutes 5 Minutes 5 Minutes and starting test: Test Start Time: 10:10 10:50 11:50 Initial Reading(R,): .001 .001 .001 Test End Time: 10:40 11:20 12:20 Final Reading(RF): .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes Change in Reading(RF-Rj): 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes Test Result: X Pass ❑Fail X Pass ❑Fail X Pass ❑Fail D Pass ❑Fail Was sensor removed for testing? X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testin ? Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to 4gy of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)