Laserfiche WebLink
WESTERN FIBERGLASS, INC. 1-800-688-3375 <br />DISPENSER MOL74 T ING ASSEM:bLY (DMA) <br />Summary <br />The Dispenser Mounting Assembly Containment System is installed in conjunction with the product <br />dispenser and in accordanm with the manufacturer's installation inunctions. The Dispenser <br />Mounting/rontamment System shaIl contain environmentally hazardous fluids that might Ieak from any <br />piping terminations, fittings, and flex -hoses contained within the Dispenser Mounting/Contaimnent <br />Assembly, sball ins=, using U.L..Listed mounting systems for both dispenser base and safety valves, that <br />safety valve poppet activation ec.^ms in the event of dispenser knock -down without damage to either <br />mountframe system and sballbe mamuactiued by West= Fiberglass, Inc. <br />System Specification <br />1.01. System Suitability, <br />The Dispenser Mounting Containment System shall: <br />A Provide secure, independent, U.L. Listed mounting assemblies for both the dispenser base <br />and shear valve that shall be anchored in concrete for transfer of stress and loading. Such <br />that shearing action occurs at the shear valve upon.dispense4r impact without damage to the <br />motmting frameworks. <br />B. Provide a means to prevent surface, ground, ron-off or wash -down water from entering the <br />containment system <br />C. _ Containany release of environmental contaminants firm the dispenser and/or fittings <br />contained within the Dispenser Mounting/Containment System <br />D. Provide fall access to all piping termination's, firings and hoses contained within the <br />Dispenser Motmting/Containmem Sysmm. <br />E. Accommodate an explosion/flame suppressant barrier to prevent flash fire. <br />F. Be available U.L. Listei in FRP construction. <br />1.02 Construction Specifications: <br />A Meet or exceed United States National Burrett of Standards PS -15-69 for Custom contact - <br />Molded Reinforced Polyester Chemical-Rcsistam Process Egttipment or U.L. Listing if <br />applicable. <br />B. Be constructed of materials that are not barmfiil to the environment. <br />C. Be suitable for petroleum products and blends inciuding methanol and ethyl alcohol <br />D. Have a thirty (30) year warranty against corrosion. <br />1.03 Release Monitoring shall: <br />A Allow fall visual inspection of all piping reductions, fittings, and hoses. <br />1.4 Piping Penetrations shall: <br />a Provide locations for the installation of fluid tight pipe and conduit penetration seals to be <br />installed according to mantifficumer's instruction <br />35 <br />