Laserfiche WebLink
RECEIVED <br />SEP 0 3 2015 <br />4. FILL RISER CONTAINMENT SUMP TESTING FnnnRnnin11 e19nlrnL <br />Facility is Not Equipped With Fill Riser Containment Sumps ❑ NF41TN ncoe13rs1'rA- <br />Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br />Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic <br />❑ Other (Specific) <br />Test Equipment Used: Incon Sump Tester Equipment Resolution: +/ 0,002" <br />Vent Sump <br />Sump Diameter: <br />18" <br />Sump Depth: <br />31" <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />A.. <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />10.. <br />Condition of sump prior to <br />testing: <br />Good <br />Portion of Sump Tested <br />2" above piping <br />Sump Material: <br />Fiberglass <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test <br />30 minutes <br />Test Start Time: <br />10:00 am <br />Initial Reading (Rj): <br />5.5650 <br />Test End Time: <br />10:15 am <br />Final Reading (RF): <br />5.5664 <br />Test Duration: <br />15 min. <br />Chane in Reading (RF-Rj): <br />0.0014 <br />Pass/Fail Threshold or Criteria: <br />+1-0.00211 <br />Test Result: <br />© Pass ❑ Fail <br />Is there a sensor in the sump? <br />® Yes ❑ No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />❑ Yes ❑ No ® NA <br />Wassensor removed for testing? <br />® Yes ❑ No C] NA <br />Was sensor properly replaced and <br />verified functional after testin ? <br />®yes ❑ No ❑ NA <br />Comments — (include information an repairs made prior to iesiing, and recommendedjbllow-up jar jailed rests) <br />Sensor functionality was not confirmed. This procedure is not part of the Secondary Containment testing scope of work <br />