Laserfiche WebLink
�'Sparg Analytical Laboratory Division <br /> Technoic <br /> Mobile Laboratory Division <br /> yInc Scientific Division <br /> With Automation ,r ry- <br /> ill Quality Control <br /> A. Prosect Specific QC. No project specific QC (i e., spikes and/or <br /> duplicates) was requested. <br /> B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations and <br /> procedures cause false-positive analytical results for your sample. <br /> C. Laboratory Control Soike. A Laboratory Control Spike (LCS) is a <br /> sample which is spiked with 30 ppb BTEX, and analyzed at <br /> approximately 10% of the sample load in order to establish method- <br /> specific control limits. The LCS results associated with your samples <br /> are on the attached 8020 Modified LCS BTEX Analysis Report. <br /> . D. Matrix Spike Res€ilrs. A Matrix Spike is a sample which is spiked <br /> with 30 ppb BTEX, Gnd analyzed at approximately `0% of the sarnois <br /> load in order to establish method-specific control limits. The Matr',x <br /> Spike results associated with your samples are on the attached 8020 <br /> Modified Matrix-Spike BTEX Analysis Report. <br /> No target parameters were detected in the method blank associated <br /> with your sample at the reporting limit levels noted on the data sheets <br /> in the Analytical Results section. <br /> Accuracy is measured by Percent Recovery as in: <br /> % recovery = measured concentration) x 10 <br /> (actual concentration) <br /> IV Analysis Results <br /> Results are on the attached data sheets. <br /> i <br /> I <br /> 3OW Fite Circle Suite 112 • Socrcmento Colifornic 95827 • (9f6) 362-8947 • FAX(916) 362-0947 <br />