Laserfiche WebLink
® date submitted <br /> ' • specific analytical parameters <br /> O well number <br /> C sample source <br /> ' Analytical Methods <br /> Samples collected as part of the monitoring program will be analyzed con- <br /> sistent with accepted analytical procedures. The following publications are <br /> the primary references for analytical procedures: <br /> ' O Methods for Chemical Analysis of Water and Wastes, <br /> EPA-60014-79-020, revised March 1983 <br /> ' G Methods for Organic Chemical Analysis of Municipal and <br /> Industrial Wastewater, EPA-60014-82-057, July 1982 <br /> ' C Test Methods for Evaluating Solid Wastes: Physi- <br /> cal/Chemical Methods, EPA SW-846, 3rd edition, Novem- <br /> ber 1986 <br /> Leaking Underground Fuel Tank Manual, State !Nater <br /> Resources Control Board, State of California Leaking <br /> ' Underground Fuel Tank Task Force, revised October <br /> 1989 <br />' The laboratories selected to perform the analytical work will be certified by <br /> the Department of Health Services (DHS) for hazardous waste testing. <br />' Quality Assurance/Quality Control <br /> Quality assurance/quality control (QA/QC) measures will be taken to con- <br /> firm the integrity of the field and laboratory data generated during the <br /> monitoring program. The procedures used to assess data quality are <br /> described in this section. An evaluation of the field and laboratory quality <br /> assurance data will be included in the technical reports. <br /> Field Quality Assurance Procedures <br /> Field quality assurance procedures will be included in each monitoring <br /> event and include documenting field instrument calibration, and collecting <br /> and analyzing trip blanks, field blanks, and duplicate samples. <br /> pjAf921f920201 a C - 8 Rev. 0 June 1, 1992 <br />