Laserfiche WebLink
Item Task Status Comments <br /> 5.2 Valves Check the condition of Yes* XNo <br /> all valves for leaks, <br /> corrosion and <br /> damage. <br /> 5.2.1 Anti-siphon, Cycle the valve open xYes No* N/A <br /> check and and closed and check <br /> gate valves for proper operation. <br /> l 5.2.2 Pressure Check for proper xYes No* N/A <br /> regulator operation. (Note that <br /> valve there may be small, <br /> 1/4 inch drain plugs in <br /> the bottom of the valve <br /> that are not visible by <br /> looking from above <br /> only) <br /> 5.2.3 Expansion Check that the valve is xYes No* N/A <br /> relief valve in the proper <br /> orientation. (Note that <br /> fuel must be <br /> discharged back to the <br /> tank via a separate <br /> pipe or tubing.) <br /> 5.2.4 Solenoid Cycle power to valve Yes "No*)(N/A <br /> valves to check operation. <br /> (Electrical solenoids <br /> can be verified by <br /> listening to the plunger <br /> opening and closing. If <br /> no audible <br /> confirmation,the valve <br /> should be inspected <br /> for the presence and <br /> operation of the <br /> plunger.) <br /> 5.2.5 Fire and a. Manually cycle the Yes ;No* XN/A <br /> shear valves valve to ensure <br /> components are <br /> moving freely and that <br /> the valve handle or <br /> lever has clearance to <br /> allow valve to close <br /> completely. <br /> b.Valves must not be Yes No* ,gN/A <br /> wired in❑ en position. <br /> AST INSPECTION STANDARD 34 SEPTEMBER 2011 <br />