Laserfiche WebLink
SWRCB, January 2002 <br />7. FILL RISER CONTAINMENT SUMP P TF cTTNr_ <br />Page of <br />Facility is Not Equipped With Fill Riser Containment Sums ❑ <br />Fill Riser Containment Sumps are Present, but were Not Tested <br />Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br />�_ _^- ,-❑ Other (Specify) <br />Test Equipment Used: <br />Equipment Resolution: <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Sump Diameter: <br />- — - - ---- ----- <br />--- - - <br />Sump Depth: <br />- -- ----- <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />' <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />_ <br />Test Start Time: <br />Initial Readin aj) <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF -R.1): <br />Pass/Fail Threshold or Criteria: <br />Test Result: _ <br />❑ .:Pass D :Fail <br />❑ Pass Fail <br />❑' Pass ❑ Fait ' ; <br />` C} Pass :° iJ Fail ':. <br />Is there a sensor in the sump? <br />❑ Yes ❑ No <br />❑ Yes ❑ No <br />❑ Yes 0 No <br />❑ Yes ❑ No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />0 Yes ❑ No ❑ NA <br />Was sensor removed for testing? <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No [INA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ ' <br />Was sensor properly replaced and <br />verified functional after testing? <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No IWA <br />Comments - (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />