ARCHIVED REPORTS XR0007810 - Laserfiche WebLink

Home Browse Search

i TECHNICAL SPECIFICATIONS I Desk n S eci canons • Process Flow- The SCAT 250 can process 250 CEM of contaminated air on a ' continual basis. Process Connection: 3mch fnpt connection ' . VOC Processing Capability: The Electric Catalytic Oxidizer can treat up 3,500 ppmv of VOC's or approximately 25% LEL The LEL level can be determined by analyzing the temperature rise across the catalyst cell, which occurs from the combustion of the vapors (t% LEL = approximately 25° F rise above the catalyst miet temperature of 6500F) Catalytic Module: The Catalytic Module Ls a platinum coated metal monolith that can achieve conversion of most VOC's at approximately half of the operating ' temperature of a thermal oxidizer The temperature range for catalytic oxidation is 600°F to 1150°F and is limited to non-chlorinated and non-leaded vapor streams for the standard ECAT unit Specialized catalysts and materials of construction are 10 utilized for other vapor streams a Destruction EMc:eucy: The Destruction Ef ictency of VOC's for the standard ' ECAT is 95% -i- Major Components . Trailer or Skid: The ECAT can, be either trailer or sled mounted_ Skid dimensions are 75 inches wide x 60 inches long x 1.56 ranches tail / weight approximately 4,500 pounds Trader dimensions are 102 inches wide x 144 mches long x 156 mches tall / weight 5,500 pounds ' • Entrainment Separator: The Entrainment Separator is provided to remove water that is brought up during vapor extraction from the vapor stream. It has a tangential inlet that cyclone separates the water from the vapors with 90% efficiency It also has r a filter to remove incoming particulate The Entramment Separator ch ensions are 16 mches in diameter x 60 inches tali- ' . Vacuum Pump: The Vacuum Pump extracts the vapors from the sod and can produce vacuum levels from 1 inch of water to 350 mches of water depending on the ' type of pump provided. The pump is powered by a motor, which is sized to provide enough horsepower to generate the flow required at the specified vacuum level for each system.