COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

SPCC PLAN REGULATORY CROSS-REFERENCE TABLE Section in 40 CFR this SPCC Section Description Plan 112.7(b) Where experience indicates a reasonable potential for equipment failure 3.1 (such as loading or unloading equipment,tank overflow,rupture,or Table 3-1 leakage,or any other equipment known to be a source of a discharge), include in your Plan a prediction of the direction,rate of flow,and total quantity of oil which could be discharged from the facility as a result of each type of major equipment failure. 112.7(c)(1) Provide appropriate containment and/or diversionary structures or 3.2-3.6 equipment to prevent discharged oil from reaching navigable watercourse. The entire containment system,including walls and floor,must be capable of containing oil and must be constructed so that any discharge from a primary containment system,such as a tank or pipe,will not escape the containment system before cleanup occurs.At a minimum,include one of following preventive systems for onshore facilities: (i) Dikes,berms or retaining walls; 3.2-3.6 (ii)Curbing; 3.2-3.6 (iii)Culverts,gutters or other drainage; N/A (iv)Weirs,booms or other barriers; N/A (v) Spill diversion ponds; N/A (vi)Retention ponds;and, N/A (vii)Sorbent materials. 3.2-3.6 112.7(d) When installation of structures or equipment,as outlined in 112.7(c)and N/A (h)(1)and 40 CFR 112.8(c)(2),(c)(11),112.9(c)(2),112.10(c), 112.12(c)(2), 112.12(c)(11),112.13(c)(2)and 112.14(c)is not practicable, clearly explain why such measures are not practicable;for bulk storage containers,conduct periodic integrity testing of the containers and periodic integrity and leak testing of the valves and piping,unless you have submitted a response plan under 40 CFR 112.20 provide the following in your SPCC Plan: 1. Provide an oil spill contingency plan described in 40 CFR 109;and, N/A 2. Provide a written commitment of manpower,equipment and materials N/A to control and remove harmful quantity of oil discharged. 112.7(e) Conduct inspections and tests required by this part in accordance with 4.1 written procedures that you or the certifying engineer develop for the Appendix 4 facility.You must keep these written procedures and a record of the inspections and tests,signed by the appropriate supervisor or inspector, with the SPCC Plan for a period of three years.Records of inspections and tests kept under usual and customary business practices will suffice for purposes of this paragraph.