COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

SPCC PLAN REGULATORY CROSS-REFERENCE TABLE Section in 40 CFR this SPCC Section Description Plan 112.8(c)(1) Construct all bulk storage container installations so that you provide a 3.2,3.3 secondary means of containment for the entire capacity of the largest single container and sufficient freeboard to contain precipitation.You must ensure that diked areas are sufficiently impervious to contain discharged oil.Dikes,containment curbs,and pits are commonly employed for this purpose.You may also use an alternative system consisting of a drainage trench enclosure that must be arranged so that any discharge will terminate and be safely confined in a facility catchment basin or holding pond. 112.8(c)(3) Not allow drainage of uncontaminated rainwater from the diked area into a N/A storm drain or discharge of an effluent into an open watercourse,lake,or pond,bypassing the facility treatment system unless you: (i)Normally keep the bypass valve sealed closed. N/A (ii) Inspect the retained rainwater to ensure that its presence will not N/A cause a discharge as described in§112.1(b). (iii)Open the bypass valve and reseal it following drainage under N/A responsible supervision;and (iv)Keep adequate records of such events,for example,any records N/A required under permits issued in accordance with§§122.41(j)(2)and 122.41(m)(3). 112.8(c)(4) Protect any completely buried metallic storage tank installed on or after N/A January 10,1974 from corrosion by coatings or cathodic protection compatible with local soil conditions.You must regularly leak test such completely buried metallic storage tanks. 112.8(c)(5) Do not use partially buried or bunkered metallic tanks for the storage of N/A oil,unless you protect the buried section of the tank from corrosion.You must protect partially buried and bunkered tanks from corrosion by coatings or cathodic protection compatible with local soil conditions. 112.8(c)(6) Test each aboveground container for integrity on a regular schedule,and 4.1 whenever you make material repairs.The frequency of and type of testing must take into account container size and design(such as floating roof, skid-mounted,elevated,or partially buried). • You must combine visual inspection with another testing technique 4.1 such as hydrostatic testing,radiographic testing,ultrasonic testing, acoustic emissions testing,or another system of nondestructive shell testing. • You must keep comparison records and you must also inspect the 4.1 container's supports and foundations.