Laserfiche WebLink
C, <br /> Table 2 <br /> Fuel Oxygenates Analytical Data <br /> -ARCO Service Station No:•2130- <br /> 7906 N. EL Dorado Street, Stockton, CA <br /> TBA=Tertiary butyl alcohol <br /> MtBE=Methyl tert-butyl ether <br /> DIKE=Di-isopropyl ether <br /> EtBE=Ethyl tert-butyl ether <br /> TAME=.Test-amyl methyl ether <br /> 1,2-OCA= 1,2-Dichloroethane <br /> pg/L=micrograms per liter <br /> <=Below detection limit for analytical methods used. <br /> —=not measured or analyzed <br /> NA=Not analyzed. <br /> Reporting limits raised due to matrix effects and/or other factors. <br /> Data Qualifier Definitions: <br /> lJ=The analyte was analyzed for,but was not detected above the sample reporting limit. <br /> J=The analyte was positively identified;the associated numerical value is the approximate concentration of the analyte in the sample. <br /> N=The analysis indicates the presence of an analyte for which there is presumptive evidence to make a tentative identification. <br /> NJ=The analysis indicates the presence of an analyte that has been tentatively identified and the associated numerical value represents its approximate concentration. <br /> UJ=The analyte was not detected above the reported sample reporting limit. However,the reported reporting limit is approximate and may or may not represent the actual limit of quantitation <br /> necessary to accurately and precisely measure the analyte in the sample. <br /> R=The sample results are rejected due to identification or other analytical issues. <br /> ND=Not detected above reported detection limit <br /> Report 0!ate.,April 25,2005 page 14 of 14 <br />