Laserfiche WebLink
1-2100-PEVR Series 1-2100-DEVR Series <br />Vapor Recovery Spill Container Product Fill Spill Container <br />VE <br />C'. <br />�R <br />1DK-2100-EVR FSA -400 611SK 71 JSK <br />Drain Valve Threaded Riser Jack Screw Jack Screw <br />Adaptor USA Patent No. 6,523,581 E85 EVR Approved <br />OPW Threaded Riser Adaptor (Face Seal Adaptor) <br />An OPW FSA -400 Threaded Riser Face Seal IAdaptor provides a flat, true sealing <br />surface on threaded pipes where a gasket seal exists per EVR requirements. The FSA - <br />400 is installed on the fill pipe riser below the spill container to provide a true sealing <br />surface for the drop tube flange on the overfill prevention valves. The FSA -400 is also <br />required on tank gauging risers and optional on vapor risers and rotatable adaptors. <br />61JSK, 71JSK (Jack Screw Device) <br />Ordering Specifications <br />Product # <br />Description <br />FSA -400 <br />4" Face Seal Adaptor <br />FSA -400-5 <br />4" Short Face Seal Adaptor for Cast Iron Base Only <br />61 JSK-4410 <br />Jack Screw Kit for Composite Base Spill Bucket <br />61 JSK-44CB <br />Jack Screw Kit for Cast Iron Base Spill Bucket <br />71 JSK-4RMT <br />Remote Fueling Jack Screw Kit E85 EVR Approved <br />71 JSK-44M4 <br />Jack Screw Kit for Cast Iron Base Spill Buckets E85 EVR Approved <br />;.:4`32241• <br />OPW 1-2100-EVR <br />Series Direct Bury <br />Spill Containment <br />For CARB/EVR <br />The OPW Thread -On 1-2100-EVR <br />Series Spill Containers are certified <br />for installation on OPW Phase I EVR <br />Systems, All Fill Port Spill Containers <br />feature an enhanced 1 DK-2100-EVR <br />vapor tight drain valve (DEVR Models), <br />The Vapor Return Spill Containers (PEVR <br />Models) feature a permanent plug in <br />the drain port as per EVR requirements, <br />The 1-2100-EVR Series Thread -On Spill <br />Containers are available in Composite <br />or Cast Iron bases with either 5 or <br />15 -gallon buckets. <br />The FSA -400 Threaded Riser Face Seal <br />Adaptor is installed on the fill pipe <br />below the spill container to provide a <br />true sealing surface for the drop tube <br />flange on the 61 SO and 71 SO overfill <br />prevention valve. The 61 SO and 71 SO <br />series valves are installed in the base of <br />the OPW EVR spill container with the <br />patent -pending 61JSK Jack Screw device. <br />This configuration allows liquid in the <br />spill container to be drained directly into <br />the drop tube thereby isolating the drain <br />valve from the tank ullage, eliminating a <br />notorious leak point in previous systems. <br />www.opwg1oba1.corn 57 <br />