Laserfiche WebLink
' KLE/NFELDER <br /> 8rr9h1➢ecylP.PrpMbl Wani. <br /> ' accuracy is 0.1 foot for the "x" and "y" coordinates and .01 foot for the "z" coordinate. The depth <br /> to static ground water is measured from a set location at the top of the PVC casing. The depth <br /> of water is then subtracted from the elevation of the top of the well casing to provide a ground <br /> water elevation for each monitoring well location. <br /> A-4. COLLECTION HYDROPUNCH Ile GROUNDWATER SAMPLES <br /> One-time groundwater samples are collected using a Hydropunch II®, which is an in situ <br /> groundwater sampling device. The borings will be advanced to a depth equivalent to the bottom <br /> ' of the capillary fringe. A stainless steel drive tip equipped with a filter is lowered into the borings <br /> at the end of a 2.5-inch diameter galvanized steel pipe and pushed using the drill rig <br /> approximately 3 to 5 feet into the soil/aquifer formation at the bottom of the boring. A thoroughly <br /> decontaminated bailer can then be lowered down the center of the Hydropunch IC' casing to <br /> obtain a sample of groundwater (which has entered the Hydropunch ll® due to hydrostatic <br /> tpressure). <br /> To reduce the potential of introducing contaminants into the samples, the drive tip, galvanized <br /> pipe, and other equipment used for sample collection are steam cleaned and/or washed with <br /> t trisodium phosphate (TSP) solution and rinsed with distilled water prior to use. The sample tips <br /> and filters are not retrievable. New 0-rings, tips, and screens are used for each sample. <br /> 1 <br /> 101486.6/SAC14R0504 Page A-6 April 28, 2014 <br /> Copyright 21114 Kleinfelder <br />