Laserfiche WebLink
and stop at a preset time, (i.e. Daily,Weekly or 11.0 PAPER REPLACEMENT <br /> Monthly). Each individual tank can be <br /> programmed separately using function 87 and The X76 ETM uses Seiko thermal paper#TP201-211- <br /> 88. Function 89 will print the Auto Leak Detect <br /> set-up information.When the test frequency is 25c, 2 1/4"x 75'. Check with your local API/Ronan Bis- <br /> set for weekly or monthly testing, a notice will tributor or call 1-800-643-0085. <br /> be printed 24 hours in advance of the test start 1. Open the controller door. <br /> time as a reminder. 2. Remove the used paper roll, and save the roll shaft. <br /> 10.2 Leak Detect Test Results 3. Put roll shaft in the new roll of paper. <br /> Leak Detect Test results are printed automat- 4. Cut end of the new roll to a point and insert paper <br /> ically at the beginning and end of the test between green printer board and the black printer <br /> period. Results are printed only for the tank or mechanism, until the tip of the paper extends out <br /> tanks selected.The reports include tank inven- of the printer on the front side of the controller. Pull <br /> tory at the beginning of the test,with pass/fail paper from front side until cut edges are free of <br /> results and inventory printed at the end of the machine. <br /> test. The Last Leak Test result for each tank is 5. Reset the new paper roll in the slot on the bracket. <br /> stored in memory and can be printed by press- <br /> 6. <br /> ing the Print key, PRINT, selecting choice 5, Select print to check printer operation. If there are <br /> and pressing ENT. no visible characters,then the paper is reversed. <br /> Remove the paper and re-feed with the paper side <br /> reversed. <br /> 14 <br />