Laserfiche WebLink
UST SYSTEM PRINTSET INFORMATION <br /> 1. -'N Four complete sets of plans (To include specification sheets and/orui <br /> eq Anent brochures if not on file). <br /> 2. Plans drawn to scale in non-erasable print. <br /> 3, !\ Plot plan to show location and number of tanks. <br /> 4. Tank cross-sectional diagram included on prints submitted. <br /> 5. Detail of tank, piping system, excavation and cover. <br /> 6. 7� Tank(s) and piping approved by a nationally recognized independent testing organization, <br /> Article 3, Sec. 2631 (r) & 26351 [Title 23, Subchapter 16, <br /> 7, Verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. [Section 2635 (b) (2)] <br /> 8• Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. (Section 2635 (b) (5)] <br /> 9, ) Tightness Test (NFPA 30) is required on bothrimar <br /> (Section 2635 (b) (6) & (7)] A Y (10) and secondary (20) containment systems before covering. <br /> 10. Double walled tanks using pressure or vacuum testing to monitor the annular space. (Section 2635 (b) (7)] <br /> 11. ;� NFPA 329 "Precision Test" required upon completion of installation with tank in o <br /> ( be submitted directly to PHS/EHD from the testin c Aerating condition, Test results to <br /> \ g ompany or owner of facility. [Health & Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (g)] <br /> 12. TANK COMPOSITION <br /> TANK # # <br /> CAPACITY I wv C-t„ iS cc C-)R L <br /> MANUFACTURER <br /> COMPOSITION B:1 .' L <br /> MODEL G� <br /> PRODUCT �� 1����F % {'��• �� <br /> CORROSION PROTECTION <br /> U.L. LISTED <br /> COMPATIBILITY WITH 100% <br /> METHANOL <br /> 13. ^TANK(s) TO BE INSTALLED <br /> A. Steel-clad with fiberglass reinforced plastic. <br /> B. Holiday test required immediately before "setting" tank(s) (35,000 40,000 volts). [Section 2635 (b) (4)] <br /> C. Fiberglass [Sections 2635 (3) and 2631 (p)] <br /> (1) Striker plate dimensions and materials. <br /> (2) Striker plate under all accessible openings. <br /> (3) Installation instructions require an air test and soap bubble test prior to installation. <br /> D. Non-clad steel tank [Section 2635 (b)] <br /> (1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br /> etc.), <br /> (2) Approved by a corrosion engineer or N.A.C.E. technician. <br /> (3) Document stating inspection method and frequency (minimum semi-annual inspection requirement). <br /> 4 <br />