Laserfiche WebLink
EST, <br />Easy, Economical <br />Installation <br />Lightweight RED THREAD II pipe is <br />available in 15 and 30 ft. random lengths. <br />The easy-to-use T.A.B.'" Joint, <br />standard on UL/ULC RED THREAD II <br />pipe, promotes fast positive <br />makeup and prevents <br />"backout" problems <br />during cure time. a> <br />The combina- <br />tion of light <br />weight, y' <br />ra <br />flexi- <br />ility and <br />joining <br />assures econo- <br />mical installation. <br />joining System <br />The exclusive T.A.B. (Threaded and <br />Bonded) Joint is factory installed. It is <br />the standard joining system for UL/ULC <br />Listed RED THREAD II pipe. Spigotand <br />bonded -on coupling ends are threaded <br />with special profile double -lead <br />threads. Combined with adhesive at <br />time of assembly, the T.A.B. Joint is also <br />fast and easy to install. The standard <br />joining procedure for field -made <br />epoxy bonds is achieved by <br />the mechanical locking <br />action of matching bell and <br />spigot taper angles. <br />Fittings compatible with the <br />product piping are also listed by <br />Underwriters Laboratories for use in <br />underground handling of petroleum <br />products. <br />When connecting containment pipe <br />and fittings, plain ends of the containment <br />pipe are machined or thoroughly sanded <br />to accept the two-piece U L/ULC Listed <br />containment fitting. Containment pipe <br />must be positioned over the product <br />piping prior to assembly and bonding of <br />the product pipe system. <br />Upon completion of a successful prod- <br />uct pipe test procedure, the secondary <br />containment fittings may be installed. <br />GENERAL SPECIFICATIONS AND RATINGS"' <br />The system -matching <br />adhesive is applied to all <br />bonding surfaces, and the fitting <br />halves are then joined and bonded. <br />Proper assembly and bonding proce- <br />dures are detailed in Smith Fiberglass <br />Products installation manual 1055 for <br />product piping and manual 1190 for <br />secondary containment piping. Or, con- <br />tact your local Smith Fiberglass Products <br />distributor for a video presentation. <br />Special two-piece containment fittings allow <br />the product piping to be tested before the <br />system is sealed. <br />Nominal <br />Nominal <br />Nominal <br />Nominal <br />Nominal <br />MITI Test <br />Extemal Pressure <br />Max. Rating psig/MPa at <br />Random <br />Pipe Size <br />O.D. <br />I.D. <br />Wall Thickness <br />Weight <br />Pressure -Temp. <br />Pressure <br />Lengths <br />75°F/24°C <br />150°F/66°C <br />In. <br />In./mm <br />In./mm <br />In./mm <br />lbs.-R./kg.m <br />Max. Rating <br />pslg <br />k./m <br />2.375 <br />2.235 <br />0.070 <br />0.4 <br />250 psig @ 150° F <br />1000 <br />112 <br />106 <br />15 <br />30 <br />2 <br />60.33 <br />56.77 <br />1.78 <br />0.60 <br />1.72 MPa @ 66.5° C <br />6.89 <br />.77 <br />.73 <br />4.6 <br />9.1 <br />3.500 <br />3.360 <br />0.070 <br />0.6 <br />175 psig @ 150° F <br />700 <br />29 <br />23 <br />15 <br />30 <br />3 <br />88.90 <br />85.34 <br />1.78 <br />0.89 <br />1.21 MPa @ 66.5° C <br />4.83 <br />20 <br />.16 <br />4.6 <br />9.1 <br />4.500 <br />4.360 <br />0.070 <br />0.8 <br />125 psig @ 150° F <br />500 <br />24 <br />23 <br />15 <br />30 <br />4 <br />114.30 <br />11074 <br />1 78 <br />119 <br />0.86 MPa @ 66.5° C <br />3.45 <br />17 <br />.16 <br />4.6 <br />9 1 <br />14 <br />(1) All values except pressure -temperature maximum rating are nominal values. Tolerances or maximum/minimum limits can be obtained from Smith Fiberglass Products Inc. 17 <br />