SU0007300 - Laserfiche WebLink

Home Browse Search

Table 1 Acoustical Terminology Acoustics The science of sound. Ambient The distinctive acoustical characteristics of a given space consisting of all noise sources audible at that location. In many cases, the term ambient is used to describe an existing or pre-project condition such as the setting in an environmental noise study. Attenuation The reduction of an acoustic signal. A-Weighting A frequency-response adjustment of a sound level meter that conditions the output signal to approximate human response. Decibel (dB) Fundamental unit of sound, A Bell is defined as the logarithm of the ratio of the sound pressure squared over the reference pressure squared. A Decibel is one-tenth of a Bell. CNEL Community Noise Equivalent Level. Defined as the 24-hour average noise level with noise occurring during evening hours (7- 10 p.m.)weighted by a factor of three and nighttime hours (10 p.m.— 7 a.m.)weighted by a factor of 10 prior to averaging. Frequency The measure of the rapidity of alterations of a periodic signal, expressed in cycles per second or hertz. Ldn Day/Night Average Sound Level. Similar to CNLL but with no evening weighting. Leq Equivalent or energy-averaged sound level, Lmax The highest root-mean-square (RMS) sound level measured over a given period of time. Loudness A subjective term for the sensation of the magnitude of sound. Masking The amount (or the process) by which the threshold of audibility is for one sound is raised by the presence of another (masking) sound. Noise Unwanted sound. Peak Noise The level corresponding to the highest(not RMS) sound pressure measured over a given period of time. This term is often confused with the "Maximum" level, which is the highest RMS level. SEL Sound exposure level, sometimes referred to as Single Event Level. SEL represents the entire sound energy of a given event normalized into a one-second period. Threshold . of Hearing The lowest sound that can be perceived by the human auditory system, generally considered to be 0 dB for persons with perfect hearing. Threshold of Pain Approximately 120 dB above the threshold of hearing. Environmental Noise Analysis Munn &Perkins Expanded Hours of Operations—San Joaquin County , Page 3