SU0002593 - Laserfiche WebLink

Home Browse Search

CONDITIONS OF APPROVAL SA-00-18 Jackey Wong Site Approval Application No. SA-00-18 was approved by the San Joaquin County Community Development Department on June 6, 2000. The effective date of approval is June 16, 2000. This approval will expire on December 16, 2001, which is 18 months from the effective date of approval, unless (1) all Conditions of Approval have been complied with, (2) all necessary building permits have been secured and remain in force, and (3) all necessary permits from other agencies have been secured and remain in force. Unless otherwise specified,all Conditions of Approval and Ordinance requirements shall be fulfilled prior to the establishment of the use and the issuance of any building permits. Those Conditions followed by a Section Number have been identified as Ordinance requirements pertinent to this application. Ordinance requirements cannot be modified, and other Ordinance requirements may apply. 1. COMMUNITY DEVELOPMENT DEPARTMENT (Staff Contact: KaiLuoma,468-9567) a. BUILDING PERMIT: Submit an "APPLICATION-COMMERCIAL BUILDING PERMIT". The Site Plan required as a part of the building permit must be prepared by a registered civil engineer or licensed architect. This Plan must show drainage, driveway access details including gates, on-site parking, landscaping, signs, existing and proposed utility services, and grading (refer to the "SITE PLAN CHECK LIST' for details). A fee is required for the Site Plan review. (Development Title Section 9-884) b. APPROVED USE: This approval is for the light manufacturing, warehousing, and distribution of plastic film products as shown on the Plan submitted April 12, 2000. c. BUSINESS LICENSE: The applicant shall secure an approved Business License prior to the initiation of the use. The Business License may be applied for concurrently with the building permit application. (Section 7-1000 of the County Ordinance Code) d. PARKING: Off-street parking shall be provided and comply with the following: (1) All parking spaces, driveways, and maneuvering areas shall be surfaced and permanently maintained with base material of appropriate depth and asphalt concrete or Portland cement concrete to provide a durable, dust free surface. Bumper guards shall be provided when necessary to protect adjacent structures or properties.(DevelopmentTitle Section 9-1015.5[e]) (2) A minimum fifty-six(56) parking spaces shall be provided, including three(3) accessible spaces, one of which shall be van accessible.(Development Title Section 9-1015.9) (3) Each parking stall shall be an unobstructed rectangle, minimum nine (9) feet wide and twenty (20)feet long. (Development Title Section 9-1015.5[b]) (4) Compact parking spaces shall be a minimum seven and one-half(7'/z)feet wide and sixteen(16) feet long, be individually designated as a compact space, and make up no more than twenty-five (25%)of the required spaces. (Development title Section 9-1015.5[c]) Conditions of Approval - 1 - SA-00-18