Laserfiche WebLink
District CEQA Reference No. 20190815 <br /> case, if not already done, please inform the project proponent to immediately submit <br /> an AIA application to the District to comply with District Rule 9510. <br /> In the case the Project is subject to District Rule 9510 an AIA application is required <br /> and the District recommends that demonstration of compliance with District Rule 9510, <br /> before issuance of the first building permit, be made a condition of Project approval. <br /> Information about how to comply with District Rule 9510 can be found online at: <br /> http://www.valieyair.org/ISR/ISRHome.htm. The AIA application form can be found <br /> online at: http://www.valleyair.org/ISR/ISRFormsAndApplications.htm. <br /> 3. The proposed Project may be subject to District Rules and Regulations, including: <br /> Regulation VIII (Fugitive PM10 Prohibitions), Rule 4102 (Nuisance), Rule 4601 <br /> (Architectural Coatings), and Rule 4641 (Cutback, Slow Cure, and Emulsified Asphalt, <br /> Paving and Maintenance Operations). In the event an existing building will be <br /> renovated, partially demolished or removed, the Project may be subject to District Rule <br /> 4002 (National Emission Standards for Hazardous Air Pollutants). The above list of <br /> rules is neither exhaustive nor exclusive. To identify other District rules or regulations <br /> that apply to this Project or to obtain information about District permit requirements, <br /> the applicant is strongly encouraged to contact the District's Small Business <br /> Assistance Office at (559) 230-5888. Current District rules can be found online at: <br /> www.valleyair.org/rules/1 ruleslist.htm. <br /> 4. The District recommends that a copy of the District's comments be provided to the <br /> Project proponent. <br /> If you have any questions or require further information, please call Sharla Yang at (559) <br /> 230-5934. <br /> Sincerely, <br /> Arnaud Marjollet <br /> Director of Permit Servic s <br /> Brian Clements <br /> Program Manager <br /> AM: sy <br />